Joined: May 09, 2009 Posts: 19 Location: Lower left corner of Virginia
Posted: Wed May 13, 2009 4:14 pm Post subject: Pistons, wrist pins, rods, cap and nuts
Got 2 sets loose, gonna try for a pic. I don't have a gallery yet, so may not be able to. Email me I guess and I can send them that way. They are just used p[istons, kind of all look the same.
A
no pics, can't remember my log on to photo bucket[/img]
Joined: May 09, 2009 Posts: 19 Location: Lower left corner of Virginia
Posted: Wed May 13, 2009 5:37 pm Post subject: maybe
I have a mid to late '40's speedo cable. It is attached to a a gauge, but I'm going to sell all the gauges together as a set. The cable on the other hand I'd be glad to sell. How can you tell if it's a M38, CJ2A or 3A? I'll mozey down to the tub it's on and make sure it's all there and turns.
A _________________ '43 MB
'46 & '48 CJ2A
'69 Coronet R/T
'75 CJ5
and counting...
Joined: May 09, 2009 Posts: 19 Location: Lower left corner of Virginia
Posted: Wed May 13, 2009 5:47 pm Post subject: yup got it.
I'll be glad to sell it with one excetion, I have to have a cable on the other two jeeps. I'm 95% sure they both do, but on the off chance I don't or one's toast, I need me a cable. The good news is it spins freely and even bounce the speedo. It is rusty on the out side, but the caps and threads look good, so it's useable for a driver. This ain't no museum piece. I will crawl under the MB and CJ2A in the morning and post back here as to the status. I reckon I got a cable for you. what are they worth?
A
P.S. if there is some nuance for an "M38" you have to be specific and pics will help. I am not real versed in these suckers let alone the specific between models. _________________ '43 MB
'46 & '48 CJ2A
'69 Coronet R/T
'75 CJ5
and counting...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum