View previous topic :: View next topic |
Author |
Message |
BullRun Member
Joined: Mar 10, 2009 Posts: 459
|
Posted: Sat May 14, 2011 12:04 am Post subject: Engine Rebuild Opinions |
|
|
I got a price today on the machine shop work for my 1962 USMC M38A1 original engine. $1550.00 7 to 8 weeks, plus parts as needed for the rebuild. I will do the rebuild.
The engine has a deep knock in the block and general loss of power and low compression but no smoke. This will be the 2nd or 3rd rebuild and first civilian rebuild. Still 24 volt with a 12 volt inverter for turn signals and stop lights. Other than that it is all original.
Just wanted to get opinions and recent experiences with parts, etc. How far do you guys take a rebuild on a running engine. Do you rebuild all the other components too? Some of the parts on these '62 engines are unique and not found on earlier or later A1's.
The machine shop is slow but they build race car engines so this is more filler work for them.
I plan on getting rid of the inverter and use a 24 volt generator so it is all original again.
This jeep is used as a daily driver.
Thanks! |
|
Back to top |
|
|
53a1 Member
Joined: Jun 25, 2008 Posts: 583 Location: Kern Co.
|
Posted: Sat May 14, 2011 9:35 am Post subject: |
|
|
1500 seems high for just the machine work but if that's the only game in town you have no choice. _________________ '53 M38A1 X2 |
|
Back to top |
|
|
Ranger Member
Joined: Apr 10, 2011 Posts: 18 Location: Houston TX
|
Posted: Sat May 14, 2011 9:39 am Post subject: |
|
|
Seems a bit high to me, I was quoted 900 for just the machine work at my local machine shop. |
|
Back to top |
|
|
BullRun Member
Joined: Mar 10, 2009 Posts: 459
|
Posted: Sat May 14, 2011 12:14 pm Post subject: |
|
|
Thanks for the advise. The last time I did this I was quoted $650. That was awhile ago. The biggest factor to me along with the price was the slow speed. About twice as long as another shop I have used.
I was hoping to get this jeep back on the road while it was still warm out! |
|
Back to top |
|
|
wallisek Member
Joined: Apr 01, 2011 Posts: 17 Location: Oregon
|
Posted: Sat May 14, 2011 12:52 pm Post subject: |
|
|
Agree with others, $1500 just for labor sounds awful high. I recently rebuilt my Jeep Comanche 4cyl 2.5L motor. A little over $500 for all block work including cam grind and crank. Another $480 in parts which I sourced. Really good price though cyl head was quoted at almost $400 just for labor. I declined and just went with a reman head for $200. This is the second jeep motor I've rebuilt and it seems like all the local shops are really expensive when it comes to heads. |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16355 Location: Wisconsin
|
Posted: Sat May 14, 2011 9:29 pm Post subject: |
|
|
Before jumping to conclusions we should have you enlighten us a little on just what machine work the shop is basing their estimate on. What of the following items are being done by the shop and what are the individual price quotes? I assume if you are doing the final assembly that you are also doing most of the light cleaning as well and most of the dimenaion checking? If you are simply disaasembling your engine and delivering the boxed engine to your shop then $1500 is not totally unreasonable.
1-Hot tank the block and head.
2-Detailed inspection of the crank and rods.
3-Detailed inspection of the block and head.
4-Detailed inspection of all valve train parts.
5-Grind valves and seats.
This is a basic cleanup and inspection. Anything else is considered repairs and should be listed separately. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
Back to top |
|
|
BullRun Member
Joined: Mar 10, 2009 Posts: 459
|
Posted: Sat May 14, 2011 11:39 pm Post subject: |
|
|
Hi Wes, the shop will do all measurements and inspect the engine for damage and how out of spec. it is from standard. They wanted to do all the measurement work themselves so I just deliver the disassembled and cleaned engine parts.
The engine runs but is pretty messed up and they know that.
The $1550 base price includes full inspection and measurements, hot tanking, Magna Flux inspection, rebore and crankshaft inspection/grinding and or repair. Camshaft too. Plus a valve job with hardened valve seats. Any and all parts are extra cost and need to be provided by me, although they can help. They were thrilled I was going to do the rebuild. Not sure that is a good sign.
They have the capacity to do crankshaft repair too.
The biggest factor for me is experience. Their machinist has over 40 years of experience and has done some of these engines so it is not a totally new experience. Locally they have a stellar reputation for providing custom race car engines. Antique engines are a minor part of their work.
The slow speed of the work is a big problem for me. It is twice as long as the last time I did this.
I know of a few other shops but they are more production oriented for newer engines or they have younger guys who have not worked on the old jeep engines.
I am going to call the other shops on Monday for comparison and maybe a few out of my area for comparison. It might be the going rate around here these days? |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16355 Location: Wisconsin
|
Posted: Sun May 15, 2011 6:33 am Post subject: |
|
|
Quote: | The $1550 base price includes full inspection and measurements, hot tanking, Magna Flux inspection, rebore and crankshaft inspection/grinding and or repair. Camshaft too. Plus a valve job with hardened valve seats. Any and all parts are extra cost and need to be provided by me, although they can help. They were thrilled I was going to do the rebuild. Not sure that is a good sign. |
You should have them quote the basics inspection costs separate from any repairs. Also have the rep[airs quoted separately. This way you can shop other shops and compare apples to apples. It is a bit presumptive of them to include a rebore and crank grinding in an estimate on an engine they haven't seen yet.
Any good machine shop can do the hot tanking and inspection for you no matter what type engines they normally do. If they lack the technical data for your old engine just loan them your engine manual.
Wait till the entire inspection is complete and make no agreements to any further repairs until you have reviewed the inspection report and had a chance to shop repair options. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
Back to top |
|
|
BullRun Member
Joined: Mar 10, 2009 Posts: 459
|
Posted: Sun May 15, 2011 3:56 pm Post subject: |
|
|
Thanks Wes, hopefully I'll have this worked out by tomorrow. |
|
Back to top |
|
|
BullRun Member
Joined: Mar 10, 2009 Posts: 459
|
Posted: Mon May 16, 2011 9:56 pm Post subject: |
|
|
Thanks everybody for your advise. You saved me a ton of money and most important time.
I talked to several more auto machine shops. Here's the scoop.
$1500 seems to be the going rate for a full engine machine shop job and 8 weeks or more turnaround time from the other local shops.
So, I called a regional CarQuest warehouse that is kind of in the sticks that also has a machine shop and struck gold.
They will do a completly machined, repaired top to bottom, ready to rebuild engine for $855 max., parts are extra but so were the others. Best of all... 2 week turnaround tops. It would be quicker but their machinist is getting married. It is May!
Even better the shop supervisor starts rattling off all kinds of technical specs. off the top of his head about the F-Head. Who needs a manual when you have it memorized.
So, by the middle of June another M38A1 will be back on the road.
Thanks! |
|
Back to top |
|
|
|