I am trying to rebuild a horn from my 1951 M38. It is receiving power but it hums. I have disassembled the horn and it is dirty and rusty. Any help woulud be greatly appreciated.
PK
Joined: May 14, 2009 Posts: 972 Location: South Dakota
Posted: Thu Jul 07, 2011 6:55 pm Post subject:
If the windings are still good, (hums is good), clean the contact points with fine wet or dry sandpaper, re-assemble, and turn the adjustment screw to get the tone. Test it on your pair of batteries. After that, buy a good one that works. They are cheaper to buy another than send it to a re-builder. I bought a 24 volt new sparton horn that had the same guts, but was different on the outside, , took the guts out and installed in my M 38 A1's body, and it worked. The cost was around 30 bucks. Save it if you can. John
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum