View previous topic :: View next topic |
Author |
Message |
Thomas Member
Joined: Nov 22, 2006 Posts: 36 Location: Van Wych, SC
|
Posted: Tue Sep 25, 2012 6:08 pm Post subject: Top Bow Assy - Top Rail Hole Location |
|
|
On my M38, I have a top bow assembly that is a reproduction. I am looking at adding a winter canvas top with side curtains, but my top bow does not have a hole to locate the top rail that attached to the bow and extends horizontally to the top retainer on the windshield frame.
Questions:
Does anyone have the dimension to locate this hole on the top bow...?
Does the hole go through both sides of the tubing...?
What size should the hole be...?
Or should the hole just be located level with the top retainer...?
I have searched most of this site and others, but cannot find this information. Any help you can give would be appreciated.
Thanks.
Thomas Schmelter
Charlotte, NC |
|
Back to top |
|
|
Bretto Member
Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT
|
|
Back to top |
|
|
RICKG Member
Joined: Aug 31, 2010 Posts: 1744 Location: SO IDAHO
|
Posted: Wed Sep 26, 2012 11:36 am Post subject: |
|
|
The holes (in mine) are 7/16 dia. The hole is centered 25" from
the center of the rivet at the pivot point. The hole goes all the
way thru. I built my rodwork per the link Bretto provided you and
it all fit nice. Just gotta scratch up enough dough to requisition
the top and side curtains.. _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a |
|
Back to top |
|
|
oilleaker1 Member
Joined: May 14, 2009 Posts: 972 Location: South Dakota
|
Posted: Wed Sep 26, 2012 12:27 pm Post subject: |
|
|
Nice info., but is the hole location on the bow the same for M38 and M38A1?????????? John |
|
Back to top |
|
|
RICKG Member
Joined: Aug 31, 2010 Posts: 1744 Location: SO IDAHO
|
Posted: Wed Sep 26, 2012 12:49 pm Post subject: |
|
|
oilleaker1 wrote: | Nice info., but is the hole location on the bow the same for M38 and M38A1?????????? John |
I wont swear on it but the pizzoferrato link lists the vertical rod
supports @ 27.5" for both M-38 and A-1 _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a |
|
Back to top |
|
|
Kendall Member
Joined: Feb 25, 2006 Posts: 345 Location: Wichita, KS
|
Posted: Wed Sep 26, 2012 8:10 pm Post subject: Hole in top bow |
|
|
The hole does not go all the way through on the three sets of top bows I have. That rod between the windshield and top bow has a 90 degree bend at the windshield and about a 45 degree at the top bow. That 45 degree bend helps hold that rod in the top bow.
Kendall |
|
Back to top |
|
|
oilleaker1 Member
Joined: May 14, 2009 Posts: 972 Location: South Dakota
|
Posted: Thu Sep 27, 2012 5:56 am Post subject: |
|
|
That 45 degree bend is also held into the hole by a strap that is located and sewn into the top on my M38A1. If you don't have the strap it will come out. The other end at the windshield has a hole that a chain and hairpin clip goes through to hold the 90 in the hole. It rattles going down the road, but works fine. (summer Top no sides or doors) John |
|
Back to top |
|
|
Cacti_Ken Member
Joined: Apr 20, 2005 Posts: 1021 Location: Silsbee, Texas
|
Posted: Thu Sep 27, 2012 2:30 pm Post subject: |
|
|
A strap!!! I have to use a tyrap. Poor quality surpluscity canvas _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM |
|
Back to top |
|
|
oilleaker1 Member
Joined: May 14, 2009 Posts: 972 Location: South Dakota
|
Posted: Thu Sep 27, 2012 5:38 pm Post subject: |
|
|
My A1 top is original and old, wonder if new tops are missing the strap? John |
|
Back to top |
|
|
|