Author |
Message |
Topic: Clutch Difficulties. |
JeffreyE
Replies: 16
Views: 21481
|
Forum: Technical Knowledge Base Posted: Thu Dec 13, 2012 4:14 pm Subject: Clutch Difficulties. |
Man.. I cant help but notice that my setup is not nearly as pretty or clean...
I have a ways to go.
In anycase for me myself the clutch is working great. |
Topic: Clutch Difficulties. |
JeffreyE
Replies: 16
Views: 21481
|
Forum: Technical Knowledge Base Posted: Wed Dec 12, 2012 6:03 pm Subject: Clutch Difficulties. |
thanks rick and wes
I wont need another cable.
i think my brother has one at the farm
I can have
thanks for the offer though!
and thanks wes for the info |
Topic: Clutch Difficulties. |
JeffreyE
Replies: 16
Views: 21481
|
Forum: Technical Knowledge Base Posted: Wed Dec 12, 2012 4:43 pm Subject: Clutch Difficulties. |
cross shaft levers seems like it was the culpret but before i could figure it out I basically broke the cable pushing it down so hard.
It looked fine to me but i guess that little bit of leverage g ... |
Topic: Modern air filter for M38A1 |
JeffreyE
Replies: 10
Views: 16825
|
Forum: Technical Knowledge Base Posted: Wed Dec 05, 2012 8:52 pm Subject: Modern air filter for M38A1 |
I did just about the same thing for my running jeep.
Basically have 2 jeeps cj2a for running around m38 for making perfect.
I think its important to have that running jeep... what is the point of a ... |
Topic: Clutch Difficulties. |
JeffreyE
Replies: 16
Views: 21481
|
Forum: Technical Knowledge Base Posted: Tue Dec 04, 2012 5:26 pm Subject: Clutch Difficulties. |
My clutch linkage looks fine and i tried the finger test but could not get any lift.
I happened to have an old flywheel / friction plate sitting around and took two pictures of what the configurati ... |
Topic: Clutch Difficulties. |
JeffreyE
Replies: 16
Views: 21481
|
Forum: Technical Knowledge Base Posted: Sun Dec 02, 2012 9:39 pm Subject: Clutch Difficulties. |
clutch worked but was starting to slip as a result of a main oil
leak so I replaced the pressure plate/friction and flywheel bushing
... did not resurface though i know i should have
I will do your ... |
Topic: Clutch Difficulties. |
JeffreyE
Replies: 16
Views: 21481
|
Forum: Technical Knowledge Base Posted: Sun Dec 02, 2012 6:45 pm Subject: Clutch Difficulties. |
If I posted a pic through the inspection cover could you tell
if the friction is on backwards?
I reallllly dont want to take it apart |
Topic: No oil pressure.. followed forum advice no dice... |
JeffreyE
Replies: 4
Views: 5946
|
Forum: Technical Knowledge Base Posted: Sat Dec 01, 2012 6:48 pm Subject: No oil pressure.. followed forum advice no dice... |
It was indeed the pickup I think.
I dropped the pan, cleaned out screen
but I also removed the pump and checked its clearences... All nice and tight.
Just the same I got new gaskets for it andrein ... |
Topic: Clutch Difficulties. |
JeffreyE
Replies: 16
Views: 21481
|
Forum: Technical Knowledge Base Posted: Sat Dec 01, 2012 4:14 pm Subject: Clutch Difficulties. |
Hello all,
I am fixing up a cj2a
and replaced the clutch pressure plate/friction disk with one I bought from kaiserwillys.com
Now the clutch will simply not disengage, I adjusted it way way back ... |
Topic: No oil pressure.. followed forum advice no dice... |
JeffreyE
Replies: 4
Views: 5946
|
Forum: Technical Knowledge Base Posted: Sun Nov 04, 2012 6:52 pm Subject: Thanks :D |
Alright thanks for the help
I hoped for a magic bullet solution but yours seems realistic.
It is always frusterating to have your project delayed but hey, we need oil pressure.
Thanks from Michig ... |
Topic: No oil pressure.. followed forum advice no dice... |
JeffreyE
Replies: 4
Views: 5946
|
Forum: Technical Knowledge Base Posted: Sat Nov 03, 2012 3:24 pm Subject: No oil pressure.. followed forum advice no dice... |
Hello All,
This is my first post. I have come here often for help but this particular issue I didnt find completely helpful.
vehicle: cj2a 1949 with L134 engine.
Background: I basically repl ... |
|