You bet. The ring looked appeared to have no rust on it but couldn't see the pinion. It has been sitting around for a while and can keep doing that for a few more years. No hurries.
I am pretty sure it is a military jeep. It matches every description and picture of an M38A1 and I have had the body and frame torn apart to look it over. Olive drab green paint underneath layers of ...
I pulled the cover off of the axle and it is stamped with 43 teeth on the ring and 8 on the pinion. The math says 5.375 but 5.38 should be the correct ratio.
Thanks for your help. I looked through the download section and didn't find the info I needed so thought I would ask. The other numbers are about a 1/2 inch to the right of 57148. Don't know what t ...
I have a rear axle off of my M38A1 that I am not using. I have never pulled it apart but it may still be in decent shape. Could get around to taking a look at it within a couple of days if you are i ...
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
Topic: 
