Posted: Wed Feb 11, 2009 6:08 pm Post subject: Connector Part Number...
I need the part number off the connector that attaches to the passenger side rear fender well for the radio set up... I know it is a 3 conductor connector, but I need to locate the other end of the set to make the connection from the radio mount to the power supply.
I have a new MT-299 mount that does not have a connector on it, and 2 MT-297 mounts without connectors...
Hal,
I believe one of the manual changes on the Military Media CD has a parts list for the connector. Fair Radio should also be able to help you out. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Apr 14, 2005 Posts: 285 Location: Livermore Ca.
Posted: Thu Feb 12, 2009 9:00 pm Post subject:
try Willy on the radio board on the Gee, I forwarded your post to him. I bought my rt68 from him years ago.
just curious, was there any conectors on your cables? when I looked in my radio manuals they only showed battery conectors, not the 3 pin for the jeep
No connectors just bare wires on the end of the cable...
If I put the connector on I can plug and play with the wiring on the mount, I figure that is what radio connector is for... also the radio cable guard sold by some vendors...
Would you have a drawing of the VRC-10 install with the proper dimensions or is it fit to order... I have a GRC-9 install drawings but I do not think they are the same...
They are all I have. I suppose you will have to measure what length of cable CO-212 you will need and assemble per drawings. Unless you can locate the part numbers listed for the Group III cable assemblies SC-D-28372-5 for cordage as found in drawing SC-d-28372, _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
I was more interested in the positioning of the radio mounts and holes in the tub; like the GRC-9 directions have... They show where to drill the holes and such for a standard install...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum