Good close up photo of M38A1 detail

[GIjivecrew]

I need a good close up photo of the top bow ends, why because i can not get a full set of bows in UK and want to convert a set of WWII bows to the flat ends for M38A1 fittings. I need to know the lengh of the flat bits and how they are attached. A good close up photo would be most useful.

thanks guys
_________________
Cheers Chris

M606A1 (Military CJ5 ) owner, 1966, ex-Swiss Army, made in Ohio. Website www.gijive.co.uk

[wesk]

Is this enough detail? From WeeBee Pizzo site
http://www.odcloth.com/rodwork.html






_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

[GIjivecrew]

Thanks for the reply It is some help, I need to make the lower section of the top bow to fit in the bracket. So I need either a photo of that bit of the top bow up close with a ruler by it or a plan with dimentions on it, I guess I also need to know how long the final side of the bows should be.


If I don't make the adaptation to the wwII bows I have I have to import a top bow from the USA or Holland at great expence.

If I leave it as is the roof has to stay up, which i guess is how the Swiss Army used it. I like to have my roof down when the sun shines, but being England I need to be able to raise the roof at a moments notice!!

thanks for your help with this one
_________________
Cheers Chris

M606A1 (Military CJ5 ) owner, 1966, ex-Swiss Army, made in Ohio. Website www.gijive.co.uk