View previous topic :: View next topic |
Author |
Message |
onabeach Member
Joined: May 06, 2010 Posts: 32 Location: Wisconsin
|
Posted: Thu Jul 08, 2010 8:14 pm Post subject: M38A1 parts FS SOLD |
|
|
I have the following M38A1 Parts: hood, grill, windshield, gas tank, door frames, engine, rebuilt cyl. head, hot water heater, front axles and parts, and springs. Some parts have "issues"; please ask me for more info on anything you are interested in. Selling whole lot for $475; will part out if lot doesn't sell. Located central WI 54971.
Last edited by onabeach on Mon Jul 19, 2010 7:53 pm; edited 1 time in total |
|
Back to top |
|
|
idiocrates Member
Joined: Nov 02, 2007 Posts: 437 Location: Seguin, Texas
|
Posted: Fri Jul 09, 2010 6:27 am Post subject: |
|
|
What condition is the gas tank in.......and would you happen to have any front seat frames? If you have any pics please sent them to idiocrates@hctc.net. Thanks. _________________ Jim
***********************
'?? - M38A-1 |
|
Back to top |
|
|
onabeach Member
Joined: May 06, 2010 Posts: 32 Location: Wisconsin
|
Posted: Fri Jul 09, 2010 7:11 am Post subject: |
|
|
Sorry, no seat frames; I need them. The gas tank is in good shape. I had it cleaned out by a radiator shop and all threaded holes are good. The outer surface is covered with a thin fiberglass coating I assume was for rust prevention. |
|
Back to top |
|
|
MODIFIED Member
Joined: Mar 28, 2008 Posts: 353 Location: BrOoKlYn
|
Posted: Fri Jul 09, 2010 7:15 am Post subject: |
|
|
pics of your items for sale would help ... |
|
Back to top |
|
|
Balvar24 Member
Joined: Sep 05, 2009 Posts: 191
|
Posted: Fri Jul 09, 2010 8:44 am Post subject: |
|
|
What kind of shape is the windshield in?
Thanks. |
|
Back to top |
|
|
onabeach Member
Joined: May 06, 2010 Posts: 32 Location: Wisconsin
|
Posted: Fri Jul 09, 2010 6:46 pm Post subject: |
|
|
The windshield has rust scale on inside and some under paint but no rust thru that I have seen. It has a cutout in the lower center for the defroster duct. The glass edges are starting to fog. It has small mounting holes along top side for a hard top.
|
|
Back to top |
|
|
onabeach Member
Joined: May 06, 2010 Posts: 32 Location: Wisconsin
|
Posted: Fri Jul 09, 2010 6:54 pm Post subject: |
|
|
Here are some more pics. If anyone would like other pics, let me know.
fiberglass covered gas tank cleaned out by radiator shop:
|
|
Back to top |
|
|
dozenjeeps Member
Joined: Aug 24, 2009 Posts: 101 Location: forestville, wisconsin
|
Posted: Mon Jul 12, 2010 5:03 am Post subject: m38a1 |
|
|
Hi, what componets are on the engine?? did it run when you took it out??? where in wisconsin are you?? will probably take the lot.. thanks _________________ m-37,m43,48 willys truck,50 willys truck, NEKAF,M170,FATBOY,74 VETTE, ULTRALIGHT,m151, bunch of flatfender CJ'S |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16355 Location: Wisconsin
|
|
Back to top |
|
|
onabeach Member
Joined: May 06, 2010 Posts: 32 Location: Wisconsin
|
Posted: Mon Jul 12, 2010 8:20 pm Post subject: |
|
|
The engine, which is apart, is an "Industrial Jeep" L head engine. It has one stuck piston; the rest are free. There is a moderate amount of upper cylinder rust. The crank has surface rust on the journals, but no scoring. It comes with the cyl. head, top, side and bottom pans, oil, fuel pumps, carb (Carter not YS) flywheel, pressure plate, exh manifold. No starter or generator. Also comes with a second rebuilt cyl head with tag. |
|
Back to top |
|
|
onabeach Member
Joined: May 06, 2010 Posts: 32 Location: Wisconsin
|
Posted: Mon Jul 12, 2010 8:56 pm Post subject: |
|
|
Sorry, it is a F head, "hurricane" engine. |
|
Back to top |
|
|
onabeach Member
Joined: May 06, 2010 Posts: 32 Location: Wisconsin
|
Posted: Wed Jul 14, 2010 4:31 pm Post subject: |
|
|
The lot of parts has been sold. Thanks for your interest. |
|
Back to top |
|
|
|