| View previous topic :: View next topic |
| Author |
Message |
mckim
Member
Joined: Jan 07, 2011
Posts: 63
Location: Idaho Falls, ID
|
 Posted: Mon Feb 21, 2011 10:03 pm Post subject: Possible M38 tire sizes |
 |
|
Yes, another thread in the seemingly endless world of tires.
I'm looking to buy a new set of tires for my M38, but not NDCCs (I'm moving to eastern Idaho and don't want to deal with NDCCs on ice). However, 7.00-16 is such a rare size that I may need to go with a slightly different size. The two sizes I see as options are 6.50-16 and 7.50-16.
I know 6.50-16 will work (half the old tires on the jeep are this size). But will 7.50-16 also work? I've read some reports of them rubbing on CJ-2As, but haven't found any reports mentioning the M38 or CJ-3A. Does anybody here have experience with this size?
On a related note, the Goodyear 7.00-16 Custom Xtra Grip Hi-Miler look great, but seem to only be available overseas. They are only shown on Goodyear's web sites for other countries. Oddly enough, they are shown on a dealer's site in Arkansas. Has anybody bought these recently? |
|
| Back to top |
|
 |
wesk
Site Administrator
Joined: Apr 04, 2005
Posts: 16399
Location: Wisconsin
|
| Posted: Mon Feb 21, 2011 11:05 pm Post subject: |
|
|
Some dealers occasionally import the European new style military mud and snow tires. They would work quite well. Have you considered going to a more modern style tire size like the somewhat newer bias ply G or H 78-16 or even the newer 205/85 R 16 and 215/85 R 16 or 225/75 R 16 radials?
Stock NDCC dimensions: 7.00-16 6PR Section width 7.80", Diameter 31.1"
Here's the dimensions for the STA mud and snow tire seen at:
http://www.stausaonline.com/light-truck/super-traxion.html
7.50-16LT
Fig A
Load range D/8
PN LB246
Tread depth 18/32
Section width 8.70
Diameter 32.20
Rim Width (Recommended) 6.00
Dual Load 2140
Single Load 2440
Inflate to 60
Weight 37
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
| Back to top |
|
|
OKCM38CDN
Guest
|
| Posted: Tue Feb 22, 2011 6:58 am Post subject: |
|
|
FYI - 7.50 x 16 will definatly rub the frame on the front... I had those in a Mud and snow on my jeep when I got it and was always rubbing...
Good Luck... |
|
| Back to top |
|
|
wesk
Site Administrator
Joined: Apr 04, 2005
Posts: 16399
Location: Wisconsin
|
| Posted: Tue Feb 22, 2011 8:41 am Post subject: |
|
|
The two primary rubbing areas for oversize tires are the front frame when the steering is cranked full left and right (for this you just adjust the steering stops as needed and sacrifice some turning circle space) and the rear at the inner wheel house vertical surface when the rear axle is tilted a lot usually in off road activities. Keep in mind this discussion is about the stock jeep with stock dimensions, stock suspension and stock wheels. Lifts and different offset wheels will change a lot of this.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
| Back to top |
|
|
RICKG
Member
Joined: Aug 31, 2010
Posts: 1751
Location: SO IDAHO
|
| Posted: Tue Feb 22, 2011 10:05 am Post subject: |
|
|
hey wes- when i got my m-38 the steering stop bolts
were welded in place-no adjustment. i thought it was
typical-was i wrong?? thx, rick
_________________
keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a |
|
| Back to top |
|
|
mckim
Member
Joined: Jan 07, 2011
Posts: 63
Location: Idaho Falls, ID
|
| Posted: Tue Feb 22, 2011 11:10 am Post subject: |
|
|
| RICKG wrote: | hey wes- when i got my m-38 the steering stop bolts
were welded in place-no adjustment. i thought it was
typical-was i wrong?? thx, rick |
Mine were too. I just cut the welds on Sunday since they weren't adjusted correctly to start with. Note the welded addition on the end of the bolt. 
 |
|
| Back to top |
|
|
mckim
Member
Joined: Jan 07, 2011
Posts: 63
Location: Idaho Falls, ID
|
| Posted: Tue Feb 22, 2011 11:32 am Post subject: |
|
|
| wesk wrote: | | Some dealers occasionally import the European new style military mud and snow tires. They would work quite well. Have you considered going to a more modern style tire size like the somewhat newer bias ply G or H 78-16 or even the newer 205/85 R 16 and 215/85 R 16 or 225/75 R 16 radials? |
Wes,
I hadn't even read anything about the European tires. Are they similar to the ones shown at http://www.militarytires.com/, or are they different? I'm assuming these are radials, correct?
I also couldn't seem to find any information on G or H bias ply tires. My dad thought they were more for a passenger application. Are these still suitable for off-road tires?
As for radials, I took a look at a 215/85 R 16 at the shop yesterday, next to a 7.50-16 and the radial looked kinda funny, mostly because of the bulging sidewalls. I guess it isn't really noticeable until the profile gets so high (or that I've only seen old jeeps with bias ply tires). |
|
| Back to top |
|
|
chuck
Member
Joined: Jan 09, 2010
Posts: 143
Location: Nashua NH
|
| Posted: Tue Feb 22, 2011 1:47 pm Post subject: |
|
|
| Take a look at the Cooper ST 215 85 R16.It's E rated so the sidewall is stiffer,and this model Cooper appears to have a skinnier profile.I had a set of 235s on a one ton pu and they were great in snow. |
|
| Back to top |
|
|
mckim
Member
Joined: Jan 07, 2011
Posts: 63
Location: Idaho Falls, ID
|
| Posted: Tue Feb 22, 2011 1:59 pm Post subject: |
|
|
| chuck wrote: | | Take a look at the Cooper ST 215 85 R16.It's E rated so the sidewall is stiffer,and this model Cooper appears to have a skinnier profile.I had a set of 235s on a one ton pu and they were great in snow. |
The guy at my local tire shop recommended these too. He thought it would be the best radial that had the right profile and decent tread. Apparently nearly all radials are too wide, especially those that have a knobbier tread design. I was really hoping to find something that looked more appropriate from the side instead of having such a scalloped appearance, but these may have to do.
 |
|
| Back to top |
|
|
chuck
Member
Joined: Jan 09, 2010
Posts: 143
Location: Nashua NH
|
| Posted: Tue Feb 22, 2011 2:52 pm Post subject: |
|
|
| How about the Cooper STT if you want a beefier look! |
|
| Back to top |
|
|
wesk
Site Administrator
Joined: Apr 04, 2005
Posts: 16399
Location: Wisconsin
|
|
| Back to top |
|
|
mckim
Member
Joined: Jan 07, 2011
Posts: 63
Location: Idaho Falls, ID
|
| Posted: Sat Feb 26, 2011 12:49 am Post subject: |
|
|
Well, I finally ended up going with the STA Super Traxion in 6.50-16. After looking at the other options, I decided they deviated just too much from the old military look.
From what I read, the Michelin X* military tires also have poor wet-pavement traction and wear down quickly on pavement due to a soft rubber compound (the same characteristic that makes them great for off-roading though).
Thanks for all your input. I feel that I've been able to make an informed decision instead of just hoping for the best.
Stuart |
|
| Back to top |
|
|
wesk
Site Administrator
Joined: Apr 04, 2005
Posts: 16399
Location: Wisconsin
|
|
| Back to top |
|
|
Bill_F
Member
Joined: Apr 17, 2005
Posts: 891
Location: New Hampshire
|
| Posted: Sat Feb 26, 2011 8:32 am Post subject: |
|
|
| you can only get the tire he select at a 6.50 |
|
| Back to top |
|
|
wesk
Site Administrator
Joined: Apr 04, 2005
Posts: 16399
Location: Wisconsin
|
|
| Back to top |
|
|
|
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
