View previous topic :: View next topic |
Author |
Message |
wilfreeman Member
Joined: Mar 13, 2006 Posts: 1079 Location: Richburg, SC
|
Posted: Sat Oct 15, 2011 4:17 pm Post subject: Safety reminder |
|
|
This is just a public safety reminder for all you dumb as*es out there like me. Just take a second to think before you do anything. I know this stuff is second nature to alot of you and some (like me) have done the same thing over and over so many times it feels like second nature.
I was trying to get the jeep to start. Fire at the points but not the plug. I finally (after setting the timing twice by removing the distributor) removed the cap and noticed electrical tape and crimp on ring connectors on the coil wires. I decided to remove the distributor one more time (it will only take a second anyway - I can do it with my eyes closed now). I cut the switch off and started loosening the distributor hold down screw when WHAM, FLASH! - my ring finger was burning like $&% . I ran around swinging my finger trying to cool it down 'til I could manage to slide the ring off before it started swelling. I grabbed a beer to cool it down, then opened it and thought about my stupidity (this was my first beer of the day, by the way).
I had become complacent in removing and replacing the distributor. After checking out the scene of the accident, I realized that even though the distributor didn't have power going to it because the switch was off, the starter is always hot. When I was loosening the hold down bolt, my ring touched the starter contact strap or post and grounded through the wrench to the distributor hold down bolt to the block!
Now my ring finger has a nice little fluid filled sac on the bottom and still burns. It will be a while before I can wear my ring again (I haven't taken it off more than a couple of times in 10 years), but I can guarantee I won't be wearing it when doing any electrical work again! My ring will keep the memory alive though - you can just see the part I couldn't sand down.
Be careful out there ya'll
[/b] |
|
Back to top |
|
|
OKCM38CDN Guest
|
Posted: Sat Oct 15, 2011 5:09 pm Post subject: |
|
|
I have worked in electronics for 35 years and to this day DO NOT wear a wedding ring for that reason (it is on a chain around my neck as a neclace; no pun intended)... I deal with battery banks that are ths size of chest freezers and hold thousands of amps of stored current... I have melted a 3/4" file in half once...
Always respect electricity, you never know when it will reach out and touch you!!!!
Glad you only got a burn, it could have been much worse...
Keep in mnd folks in the correct circumstances a 9volt battery can kill you...
Hope this helps... |
|
Back to top |
|
|
Cacti_Ken Member
Joined: Apr 20, 2005 Posts: 1021 Location: Silsbee, Texas
|
Posted: Sat Oct 15, 2011 6:35 pm Post subject: |
|
|
A very good reminder. I worked in electrical field also and didn't wear a ring.
Wilf soak that finger in some ice water and then put aloe vera on that burn, straight from the plant preferably. If it has been awhile since the event it may not help now. _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
Last edited by Cacti_Ken on Sat Oct 15, 2011 6:47 pm; edited 1 time in total |
|
Back to top |
|
|
bikemancs Member
Joined: Sep 05, 2011 Posts: 49 Location: Fayettenam, NC
|
Posted: Sat Oct 15, 2011 6:43 pm Post subject: |
|
|
This is a tip that doesn't apply only to electrical systems.
I know of two separate occurrences, in two separate theaters of operation, where individuals were dismounting armored vehicles and their rings caught on something and damaged or removed the finger. One was in S. Korea when a guy was dismounting an Abrams. The other was when we were in Iraq and someone got it caught on slat armor on a MRAP.
Thankfully you have a much smaller and heal-able reminder! |
|
Back to top |
|
|
Cacti_Ken Member
Joined: Apr 20, 2005 Posts: 1021 Location: Silsbee, Texas
|
Posted: Sat Oct 15, 2011 6:46 pm Post subject: |
|
|
Rings and ladder rungs are a bad combination also _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM |
|
Back to top |
|
|
RickC Member
Joined: Apr 11, 2005 Posts: 174 Location: Coventry, RI
|
Posted: Sat Oct 15, 2011 7:03 pm Post subject: |
|
|
I never wear my ring but my buddy actually burned his ring in half when loostening the adjustment screw under the distributor and the ring hit the battery cable on the starter...... |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16355 Location: Wisconsin
|
Posted: Sat Oct 15, 2011 9:01 pm Post subject: |
|
|
Tough lesson to learn. In both the Army and the Air Force (I had 22 years between them) it was very strictly enforced, No rings on the job! I married when I was in the Air Force 41 years ago and wore my new wedding band that Sat and Sun and then never again. I still don't wear it today. It has been in my wife's jewelry box since that Sunday in June 1970. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
Back to top |
|
|
artificer Member
Joined: Feb 16, 2007 Posts: 206 Location: Gold Coast Australia
|
Posted: Sat Oct 15, 2011 11:53 pm Post subject: |
|
|
To follow on from WEZ as ex military....from day one no rings or watches with metal bands.... _________________ John GIBBINS
ASE Master Medium/Heavy Truck & Auto Technician 2002 USA
Licensed Motor Mechanic NSW # MVIC 49593 Current
YOU CAN'T TROUBLESHOOT WHAT YOU DON'T UNDERSTAND |
|
Back to top |
|
|
Bill_F Member
Joined: Apr 17, 2005 Posts: 891 Location: New Hampshire
|
Posted: Sun Oct 16, 2011 7:04 am Post subject: |
|
|
I did the same thing as you and have the same junk taken out of my ring. My figure healed up pretty good but it did hurt a lot. |
|
Back to top |
|
|
wilfreeman Member
Joined: Mar 13, 2006 Posts: 1079 Location: Richburg, SC
|
Posted: Sun Oct 16, 2011 7:41 am Post subject: |
|
|
Yeah, we had a guy jump off the back of an M113 and got his ring caught on something - broke his finger, but at least he didn't loose it. The rule was not to wear them, but you know - some people always will.
The blister broke while I was riding the 4 wheeler last night - feels much better now. Lesson learned. |
|
Back to top |
|
|
Beast Member
Joined: Sep 25, 2011 Posts: 123 Location: Silver Lake Mi.
|
Posted: Sun Oct 16, 2011 9:02 am Post subject: |
|
|
I'm with Wes, my ring is also in the wifes jewlery box. Mine didn't even make it until we left for our honeymoon the next morning. I work way too much with my hands and have seen way too many people mangle a finger because of thier ring. Wife knew it as an understaning from the start that I don't wear rings, nor do I need one to show my love for her. |
|
Back to top |
|
|
Cacti_Ken Member
Joined: Apr 20, 2005 Posts: 1021 Location: Silsbee, Texas
|
Posted: Sun Oct 16, 2011 2:27 pm Post subject: |
|
|
When I put my ring on after retiring, my wife asked, "Why are you putting it on now, you haven't worn it all those years" I had to explain again why I didn't wear it. I even had to get it resized. _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM |
|
Back to top |
|
|
RICKG Member
Joined: Aug 31, 2010 Posts: 1744 Location: SO IDAHO
|
Posted: Sun Oct 16, 2011 6:23 pm Post subject: |
|
|
One time only..'65 GTO..should have been an easy horn button
fix.. but BZZZZ.. not a wedding ring but my HS class ring.
Hands and wrists are always clear when working w/any
machinery.. _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a |
|
Back to top |
|
|
whydahdvr Member
Joined: Jul 18, 2008 Posts: 643 Location: Melrose, MA and Santa Fe, NM
|
Posted: Mon Oct 17, 2011 6:20 am Post subject: |
|
|
OK, I'll throw my bit in.
I grew up working and around sailboats and sailing ships (tall ships) and worked as a salvage diver for a few years. We never wore rings or any jewelry for this very reason. Also, we tended to avoid wearing necklaces for the same reason. Your leaning over a whirring motor. It's a hot day and your shirt is loose. Your necklace gradually slips out and when you least expect it WHAM! It is ripped off, taking a good chunk of your neck with it and almost pulling your head into the motor.
I seen a bunch of injuries to ring fingers, almost ripped off, striped of flesh like a striped wire, completely severed.
As those in and former military note, take those things off before you start this kind of work. Rick's story here is a great reminder.
When I was overseas I wore my ring on my dog tags and we often secured those to our pants and stuck them in our pocket. |
|
Back to top |
|
|
|