Posted: Tue Aug 06, 2013 4:07 am Post subject: Steering column dash gap size.
Well summer is here, I'm on holiday so the M38 has been pulled out to try and complete last years jobs.
What should be the gap between the steering column and the dash panel?
After try to fit a duel circuit brake kit and pulling my hair out I now find along with several other problems that the body doesn't seem to sit right, due to the master cylinder in the kit being too big to allow the body to sit properly.
Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT
Posted: Tue Aug 06, 2013 4:32 am Post subject:
There is no gap.
Have you tried to loosen the steering box's 3 mounting bolts? The Ross housing has two holes that are slotted and one is fixed, allowing the whole assembly to swing up or down for adjustment. _________________ Brett
'51 M38
PHOTO DIARY OF MY BUILD
Ar..... I'll try that.
I checked a photo in the galley here of my M38 after it's first rebuild and there was no gap.
I've come to put it together again and something doesn't line up. I'll check your tip.
Thanks, Dave.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum