| View previous topic :: View next topic |
| Author |
Message |
buzzk
Member
Joined: Dec 03, 2013
Posts: 197
Location: Saint Augustine , Florida
|
 Posted: Sat Mar 15, 2014 7:07 pm Post subject: windshield |
 |
|
| I have to replace the channel on top of my windshield for the top can someone give me the measurements for the m 38 mine is missing thx buzzz |
|
| Back to top |
|
 |
BullRun
Member
Joined: Mar 10, 2009
Posts: 459
|
| Posted: Mon Mar 17, 2014 5:32 pm Post subject: |
|
|
| I think Daryl Bensinger carries these as a reproduction. Midwest Military may also carry them. |
|
| Back to top |
|
|
buzzk
Member
Joined: Dec 03, 2013
Posts: 197
Location: Saint Augustine , Florida
|
| Posted: Mon Mar 17, 2014 7:00 pm Post subject: channel |
|
|
| I have the part just need to know at what height off the vent cover so I can spot weild it on thx buzz |
|
| Back to top |
|
|
BullRun
Member
Joined: Mar 10, 2009
Posts: 459
|
| Posted: Mon Mar 17, 2014 8:59 pm Post subject: |
|
|
| Oh OK, if someone does not beat me to it I can get that as soon as the snow clears. |
|
| Back to top |
|
|
buzzk
Member
Joined: Dec 03, 2013
Posts: 197
Location: Saint Augustine , Florida
|
| Posted: Tue Mar 18, 2014 2:38 pm Post subject: channel |
|
|
| Well kind of need it this week i'm in fl its the last thing I have to do before paint and glass thx buzzz |
|
| Back to top |
|
|
ANGUS
Member
Joined: Nov 12, 2011
Posts: 2
|
| Posted: Tue Mar 18, 2014 5:32 pm Post subject: |
|
|
| ok. it measures 14 Inches from the underside of the rail to the bottom of the windshield seal. |
|
| Back to top |
|
|
BullRun
Member
Joined: Mar 10, 2009
Posts: 459
|
| Posted: Tue Mar 18, 2014 7:13 pm Post subject: |
|
|
We had a big melt today and I got out to the M38 before our next snow... spring needs to get here!
From the top edge of the rope channel to the top edge of the pressed rectangles on the vent panel I got 17 1/16th" using a tape measure clipped on the rope channel top edge measuring down to the vent panel. Ends of rope channel would be equal from ends of rope channel to edge of windshield frame. Of course the rope channel would be level. I have no idea what the +/- would be in regard to accuracy. These would of been made on a welding jig most likely so accuracy would be consistent. The rope channel ever so slightly over hangs the rubber windshield gasket by about 1/16" to 1/8th" estimate. |
|
| Back to top |
|
|
buzzk
Member
Joined: Dec 03, 2013
Posts: 197
Location: Saint Augustine , Florida
|
| Posted: Tue Mar 18, 2014 7:46 pm Post subject: channel |
|
|
| O K thanks for the info I'll check it out thursday I have a 220 spot welder with 18 inch tongs thx for the input buzz |
|
| Back to top |
|
|
|
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
