Joined: Nov 18, 2014 Posts: 128 Location: Connecticut
Posted: Fri Nov 21, 2014 7:00 pm Post subject: Recovering hood numbers
So I'm working to recover my hood numbers from under several layers of paint. I've been digging through the forums for a little while and only found a few vague answers of "use fine grit". Can anyone give some more detailed information on how to recover my hood numbers without wiping them out? Thanks in advance.
Joined: Feb 17, 2012 Posts: 530 Location: Del City, OK
Posted: Fri Nov 21, 2014 7:18 pm Post subject:
You need to sand the hood or other areas with 400, 600 or 800 grit wet sand paper. you can start with the 400 and as soon as you see different layers, switch to the more finer grits till you get your numbers... rinse often to keep the sanded material from blocking your view...
Keep in mind this is a search for lost gold, so patience is a must... take your time and you will be well rewarded... _________________ Hal, KB1ZQ
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK
Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT
Posted: Sat Nov 22, 2014 9:04 am Post subject:
In my case they were already wiped out by a previous owner. Just sayin, don't fret too much if they never show up.
The numbers, if there, have taken their time sitting on these hoods, so do your part and take your time not wiping them out. _________________ Brett
'51 M38
PHOTO DIARY OF MY BUILD
Joined: May 14, 2009 Posts: 972 Location: South Dakota
Posted: Sun Nov 23, 2014 11:02 am Post subject:
I have tried sanding and stripping with paint stripper. I had better luck with the stripper. NAPA sells it in a spray can for 6 or 7 bucks. You spray it on but don't wait too long. Then gently scrape or use a scotchbrite pad to wipe away one layer of paint at a time. You kill the stripper with water. Try a spot away from the #'s area first. With a little practice and knowing how long to leave the stripper working, it's amazing what you can do. Wear chemical resistant rubber gloves and don't get it on you or your eyes. John
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
