Joined: Oct 02, 2014 Posts: 2005 Location: South Carolina, Dorchester County
Posted: Thu Feb 23, 2017 6:58 pm Post subject: M100 Brake Backing Plate to Axle Flange Mating
Getting ready to reassemble my axle. The manual doesn't call for a gasket between the brake backing plates and the axle flanges, and there wasn't one when I took it apart.
My question might fall into what Wes calls "what the manuals don't tell you but every good mechanic already knows". I'm challenged in that department
Should I mate them dry, or would it be good to use some Permatex in between them? Seems to me like some sort of seal might be a good thing, at least for corrosion control? I saw no evidence of a sealer when I took it apart.
Your advice always appreciated! _________________ Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51
“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari
Joined: Oct 02, 2014 Posts: 2005 Location: South Carolina, Dorchester County
Posted: Tue Feb 28, 2017 10:11 pm Post subject:
I'll use a light coat of Permatex (Aviation Form-a-Gasket). _________________ Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51
“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari
A gasket is used with live axles having oil in them. The trailer does not use a gasket or sealant. Corrosion is prevented by proper painting. Gaskets and/or sealants add compressability to the joint which offers the opportunity for the bolts to loosen as the gasket shrinks. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
