| View previous topic :: View next topic |
| Author |
Message |
Thunderbird712
Member
Joined: Mar 26, 2012
Posts: 189
Location: Lexington Park Maryland (Southern Maryland)
|
 Posted: Fri Feb 09, 2018 1:36 pm Post subject: Original style 7/16 External/Internal tooth washers |
 |
|
I'm looking for some 7/16 External/Internal tooth washers for a 45 MB restoration and my M38A1 restoration. They are the tooth washers that go on the steering box bolts of an M38A1. Anyone have some in your cans of hardware? I am not interested in the newer style and haven't yet found a newer washer in the original style. Picture below for reference. Thank you.
_________________
TJ
53 M38A1 (project)
3/28/45 MB factory restoration project |
|
| Back to top |
|
 |
RonD2
Member
Joined: Oct 02, 2014
Posts: 2060
Location: South Carolina, Dorchester County
|
| Posted: Fri Feb 09, 2018 1:53 pm Post subject: |
|
|
TJ,
I might be mis-understanding your post, but I have more than a few shiny new (Mil-Spec) part number MS45904-77 lock washers (NSN 5310-00-953-8628) that are identical to your photo --- except for the rust and they aren't mashed flat.
Measurements are here:
http://www.parttarget.com/5310-00-953-8628_5310009538628_5310009538628.html/-AD7D4559-C965-45FA-9DA5-30D06F596111
Let me know if interested.
_________________
Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51
“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari
|
|
| Back to top |
|
|
Thunderbird712
Member
Joined: Mar 26, 2012
Posts: 189
Location: Lexington Park Maryland (Southern Maryland)
|
| Posted: Fri Feb 09, 2018 3:50 pm Post subject: |
|
|
Ron,
Do they look like the washers on the bottom or on the top?
_________________
TJ
53 M38A1 (project)
3/28/45 MB factory restoration project |
|
| Back to top |
|
|
Mike_B
Member
Joined: Dec 10, 2017
Posts: 349
Location: Southern Maryland
|
|
| Back to top |
|
|
RonD2
Member
Joined: Oct 02, 2014
Posts: 2060
Location: South Carolina, Dorchester County
|
| Posted: Fri Feb 09, 2018 9:57 pm Post subject: |
|
|
TJ,
I'd have to say they look like the right side bottom, maybe a tad heavier, and the MS45904-77 are cadmium plated.
The other 3 that look used and somewhat flattened I found going through my hardware bin. I can't vouch that they're original washers, but they came off my M38. I only have the 3. I suppose I could've rinsed some grease off them before I took the photo.  Will take another if you like.
You're welcome to either, or both (plenty of the cad plated on hand). Let me know. Hope this helps!
_________________
Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51
“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari
|
|
| Back to top |
|
|
|
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
