Joined: Mar 22, 2017 Posts: 301 Location: Great Mills, MD
Posted: Mon Mar 26, 2018 2:24 pm Post subject: Leaf Spring Bolt Question
This may be painfully obvious........but I'm at a loss. Why does the bolt that runs thru the center of the leaf spring pack not have a head on it that can be held by a tool (like a socket, wrench or screwdriver)? It's just a solid cylinder. I see many leaf spring bolts have this weird head. How do you tighten the nut on the bottom if you can't grip the bolt head?
They are not carriage bolts. They rely on the friction of the leaves to prevent them from turning when leaves are assembled/stacked. If the bolts are old or the holes in the leaves are worn they loose that required friction. The heads are round but much narrower then a carriage bolt and there is no square lucking lug in their tops. This bolt is commonly called a shoulder bolt.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
