Installing the electric wipers on my 1965 M38-A1 is my first project, it did not come with any wipers installed. Is there any specific diagrams for the seals or diagrams for installation?
ORD 9 SNL G-758 pages 363 Figure 22-1 and pages 368 thru 372.
Do you have a stock M38A1 windshield? Does your windshield have the holes in already? _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
I believe it is the correct windshield, it has on each side 3 holes, a larger middle hole measuring 3/4” for wiper shaft and 2 3/16” holes, one on each side.
The manuals I have are ORD 9 SNL G-758 and TM9-804 A, admittedly no electric wiper motor there. I’ll buy the others.
On the wiper shaft is it two shaft layers joined by a press fit? If so, Carl Walck mentioned using a fine tooth hacksaw to cut the outer shell. I’m trying to confirm before I slice and dice things.
Joined: Oct 02, 2014 Posts: 2005 Location: South Carolina, Dorchester County
Posted: Mon Jul 15, 2024 9:40 pm Post subject:
Hartspass wrote:
On the wiper shaft is it two shaft layers joined by a press fit? If so, Carl Walck mentioned using a fine tooth hacksaw to cut the outer shell. I’m trying to confirm before I slice and dice things.
Not exactly sure what you're doing or why, but you might consider using a tubing cutter on the outer shell instead of a hacksaw.
Good luck! _________________ Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51
“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari
If you have the stock M38A1 windshield and the correct Vacuum wiper motor then you have nothing that needs to be cut! What part number wiper motor do you have? There was one used early in both M38 & M38A1 Trico PN 63527 and one introduced later as a supersedure for both Trico PN S583-1.
Wesk my M38-A1 had no wipers mounted on the windsheild so I decided it was easier and safer to go with electric wipers since I live in Western Washington and it rains a lot here..I also have a Dauntless V-6 engine under the hood.
RonD2 I hadn’t thought of using a tube cutter instead of hacksaw. Carl in this video was suggesting using a fine tooth hacksaw to carefully cut with. https://youtu.be/kZQ7e698sBA?si=4G8x5GP9vHVGDkef.
My jeep is a recent purchase and I’ve got some things to do to it so I can drive it, such as wiring and installing the license frames, wiper motors, modifying the wheel wells and moving seat frame back since I’m tall. It’s been years since I’ve done this so I’ve been reorganizing my garage and collecting my tools together since the passing of my wife.
I have split your posting and it's replies from the old 2010 post you had attached it to. Too easy to mix parts of the old post with the new post info. So now all replies will apply only to your original post.
The manuals I listed are still necessary for working on your jeep however none specifically cover an electric conversion.
I will suggest one more excellent manual for a person who desires to make modern improvements to his or her's antique /classic jeeps.
Moses Ludel's "Jeep CJ Rebuilder's Manual 1946-71. This manual contains many interesting upgrades for universal style jeeps of our year groups.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
