Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT
Posted: Wed Jul 06, 2011 8:03 pm Post subject: body panel joint sealant
I didn't want to hi-jack Deadguys post on sealant but it brought up a question of my own.
When I cut out the toolbox so I could get to the floor replacement work, it seemed like there was a sealant between the box and the floor joint. Yes/no? Maybe it was just excess paint, I wasn't able to tell. So was there any sealant used between the body panels that were spot welded?
Thanks _________________ Brett
'51 M38
PHOTO DIARY OF MY BUILD
I used autobody seam sealant on EVERY seam of my M38's tub after a good priming, when I had it sand blasted...after putting a new OEM floor in the front. THAT was fifteen years ago. It has been sanded and repainted twice. I drive my M38 a lot in the warm months. It gets wet sometimes. I have had rust spots appear here and there but NEVER where a lap joint is present and covered with seam sealer on both sides. Pack rust attacking the bodies lap joints has always been a big problem with Jeeps. (how you going to get any paint between the lapped joints and then weld them?) The next best thing is to prevent any water, or moisture getting in there, even from condensation, let alone rain. I have several friends who during their restorations on various MV's, also coated both sides of their spot welded, lap joints with seam sealer.....NO PACK RUST. I am sold...they are sold. _________________ 1950-M38, 1952-M38, 1964 M151A1, Mechanical Mule, 1945 CCKW,M100 trailer, M416 trailer.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum