M38 torque specs

southpw · Posted: Sun Nov 01, 2015 6:45 am Post subject: M38 torque specs

I'm sure this has been brought up time and time again but can't find thread pertaining to it.

So I'm rebuilding my 52 M38 and finally at a stage to finish up some of the things I've been working on but came to a standstill last night as I couldn't find torque specs.
I am currently putting my front and rear axles back together after replacing all bearings and seals. I looked through all my manuals and couldn't find torque specs. I did find one spec of the differential bearing cap of 38-42 lb/f while reading the manual but im looking for a full list of torque specs that i can reference while my build continues, not just the odd torque spec referenced throughout the manual
Thanks for any lists you may have found
Brad
_________________
1952 M38 project
Brad

4x4M38 · Posted: Sun Nov 01, 2015 7:19 am Post subject:

Hi Brad,
The torque specs are in one of the manuals, though I don't
remember which. Operations and Maintenance, or Engine and
Power train.

I have them downloaded on my desktop and will check later if
you don't find them.

Take care,
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

southpw · Posted: Sun Nov 01, 2015 7:33 am Post subject:

Thanks Brian. I am in the garage right now fiddling with some of the brake parts now. Once I mount the new brake shoes I will go in and take another look.
_________________
1952 M38 project
Brad

Xamon · Posted: Sun Nov 01, 2015 8:08 am Post subject:

http://www.willysmjeeps.com/v2/modules.php?name=Forums&file=viewtopic&t=9160&highlight=torque
http://www.willysmjeeps.com/v2/modules.php?name=Forums&file=viewtopic&t=8328&highlight=torque

those two should have all your answers.
_________________
Carievale Saskatchewan Canada
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album210&op=modload&name=gallery&file=index&include=view_album.php

4x4M38 · Posted: Sun Nov 01, 2015 9:46 am Post subject:

Brad,
I used to have a link to CJ3A Flat Fender torque specs but when I went to it just now it was dead.

Here is a list for the CJ2A. Maybe Wes can take a look and see if it is relevant.

http://www.cj-2a.com/techtips/specs/torques.html

Take care,
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

southpw · Posted: Sun Nov 01, 2015 4:55 pm Post subject:

Thanks guys.
_________________
1952 M38 project
Brad


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.