Need m38a1 frame dimensions

[Saberr]

Need m38a1 frame dimensions. I've looked through manuals and nothing. Even google and search of old thread net me nothing. Found old one on here and wesk said there was no forms with frame dimensions. My frame is bent and i am correcting it, just hit me that i need side measurments. From both wheel arches, Front/rear bumper and middle of rail verticaly down to the leaf spring mount that under the mid rail. Hoping someone has this infor written on a napkin some where at least.

[Thunderbird712]

I have a rolling frame that I can take measurements for you. Is it possible for you show exactly what you want in a picture. Similar to what Wes has in his photo albums that show dimension lines. Don't mean to be a PITA but I want to make sure I give you exactly what you want.
_________________
TJ
53 M38A1 (project)
3/28/45 MB factory restoration project

[wesk]

The actual blue print dimension is not as important as the measurements you take per the instructions in TM 9-8015-2.



Unless you are repairing a frame that has been chopped apart and is missing parts you need to fabricate you won't need the blueprint dimensions.

Larger file size photo is here:
http://willysmjeeps.com/v2/modules/gallery/albums/album149/Frame_Alignmemnt_1a_80.jpg

TM 9-8015-2 if you don't have it is free here along with changes:
http://www.willysmjeeps.com/v2/modules.php?name=Downloads&d_op=viewdownload&cid=63&min=10&orderby=titleA&show=10
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php