View previous topic :: View next topic |
Author |
Message |
bamaj Member
Joined: Sep 22, 2013 Posts: 107
|
Posted: Fri Jul 06, 2018 3:02 pm Post subject: Engine Number |
|
|
I had the time today to do a little looking at my jeep and to start to fill out my survey. Here is a little of what I have found. Engine number is MD 104915 i have a prestolite generator 28amp the serial number for it appears to be 4484. I have an autolite distributor cover and the voltage regulator is DC electronics. As soon as I can I will send pictures and get the rest of the information on the survey. All of the data plates are missing so I have no idea of serial number or dod. I have grill that doesn't fold down I have the new style fenders and the catch for the passenger seat.the battery box lid is held down with a latch as opposed to the screws. Any date information you can give me will be greatly appreciated. Thanks Jeff |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16365 Location: Wisconsin
|
|
Back to top |
|
|
bamaj Member
Joined: Sep 22, 2013 Posts: 107
|
Posted: Fri Jul 06, 2018 8:18 pm Post subject: |
|
|
I could have missed the R I will recheck in the morning. I take it that's not a good number? |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16365 Location: Wisconsin
|
|
Back to top |
|
|
bamaj Member
Joined: Sep 22, 2013 Posts: 107
|
Posted: Sun Jul 08, 2018 7:20 pm Post subject: |
|
|
|
|
Back to top |
|
|
bamaj Member
Joined: Sep 22, 2013 Posts: 107
|
Posted: Sun Jul 08, 2018 7:20 pm Post subject: |
|
|
|
|
Back to top |
|
|
bamaj Member
Joined: Sep 22, 2013 Posts: 107
|
Posted: Sun Jul 08, 2018 7:24 pm Post subject: |
|
|
|
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16365 Location: Wisconsin
|
|
Back to top |
|
|
bamaj Member
Joined: Sep 22, 2013 Posts: 107
|
Posted: Sun Jul 08, 2018 8:16 pm Post subject: |
|
|
|
|
Back to top |
|
|
bamaj Member
Joined: Sep 22, 2013 Posts: 107
|
Posted: Sun Jul 08, 2018 8:21 pm Post subject: |
|
|
|
|
Back to top |
|
|
bamaj Member
Joined: Sep 22, 2013 Posts: 107
|
Posted: Mon Jul 09, 2018 5:43 pm Post subject: |
|
|
Wes I don't see a R before the MD the block number i sent another picture I'm not sure how well you can see it. |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16365 Location: Wisconsin
|
Posted: Mon Jul 09, 2018 6:09 pm Post subject: |
|
|
No it certainly does't look like one however if you note how lightly stamped the MD is, it is certainly possible the R could have been machined off on an earlier decking of the block. I would guess at this point you have a 1954 or 55 unit. I'll reserve a final comment until I see your completed survey form. You should mak a sincere effort to get the date codes off the axle housing and the tranny/transfer. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php
Last edited by wesk on Mon Jul 09, 2018 8:32 pm; edited 1 time in total |
|
Back to top |
|
|
bamaj Member
Joined: Sep 22, 2013 Posts: 107
|
Posted: Mon Jul 09, 2018 6:35 pm Post subject: |
|
|
I sent the tranny picture I think it's 1/22/53 I will try to get the other numbers in the next couple of days. |
|
Back to top |
|
|
|