Joined: Jan 10, 2006 Posts: 136 Location: Russellville, AR
Posted: Wed Feb 07, 2007 4:08 pm Post subject: M38 right fender
Is the m38 fenders the same as the CJ3A? My original right fender was crinkled on the front. Im going to take it by a body shop and see if they can straighten it but I may have to order a replacement. _________________ 52 M38 sn 65788
Getting Close!
The early fender was as close to the 3A as you will get. Different holes and battery relief/strap setup. The late fender has a different angle cut into the rear verticle surface for the arctic power plant heater kit. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
I don't know. It's another situation where the fender physically changed slightly but the part number remained the same. One would have to have a copy of the factory blueprint to note the effective date of the change. I would imagine it probably coincided with the introduction of the arctic power plant heater kit in 1952. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Jan 10, 2006 Posts: 136 Location: Russellville, AR
Posted: Thu Feb 08, 2007 10:00 am Post subject:
Ill take a look this afternoon at the fender that came on it and let you know if it has the new or old style on it. _________________ 52 M38 sn 65788
Getting Close!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum