Joined: Apr 23, 2008 Posts: 92 Location: Kansas City
Posted: Wed Aug 25, 2010 9:20 pm Post subject: M38 Production dates
I did a search but could not come up with any results. What were the production dates and production numbers for the M38?
Thanks,
Bill _________________ Bill
GP, GPA, GPW, M38, M38A1
Bantam T-3, M100
MVPA #1196
The numbers are always arguable but the 6 Pilot models (some will argue 7) came out in the spring of 1950 and the production M38's started down the line in September 1950 with the last off after the strike in July 1952. The written inventory sheets I have seen show a varying amount produced from 60,000 to 63,000. The monthly production figures are all over the board depending on what reports you read. It's difficult to lock down monthly production from Sep 1950 thru May 1952 because the jeeps came with only the year of manufacture on the serial plate.
The last M38 in my data base with a survey form is MC71282 with a DOD of 6/52. Since serials started with 10001 that makes it at least 61, 282. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Jul 25, 2009 Posts: 9 Location: Brownvale Alberta
Posted: Sat Aug 28, 2010 10:00 am Post subject:
Are the Canadian numbers different ? My CDN M38 is E-101784,CAR# 20LU742, ORD CODE 22-30 ,Delivery 9-10-52 ,water pump 320
MC80257
Which number is the serial number or is there another number?
Yes the Canadian M38's and A1's have a different serialization and contract system. Your serial number
Quote:
E-101784
should read F-101784
and your
Quote:
CAR# 20LU742
should actually read 52-3206X.
Stanly Blair's M38CDN is one serial before yours:
SN F101783, Made 9-16-52, on contract E20 LV742, ARMY, CFR 52-32068 _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum