Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT
Posted: Wed Feb 16, 2011 8:39 am Post subject: What is this bellhousing stud?
There was nothing attached to this when I dismantled my M38. Does anyone know what is supposed to attach here? This isn't my picture but my housing is identical.
The pedal support is mounted completely on the frame. The clutch cross shaft is mounted to the frame and the left side of the transfer case. Neither use the bell housing for attachment.
In the next photo you are looking up at the driveshaft bearing block which is directly across from the pedal support block and is fastened to that stud on the bell housing.
In the illustration below Item AM is the bearing support which uses the stud (KK) to fasten to the bell housing.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum