Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT
Posted: Sat Mar 12, 2011 8:49 am Post subject: clutch friction plate
Having never replaced a clutch, how thin is too thin? I took some measurements.
Average overall thickness is .30"
And the thickness from the surface to the closest rivets is .06"
There are no springs broken and the splines look great.
Is this good?
Who's going to be the 1st say "its out, change it"
I will. It is way too much work to replace it after you have the jeep running. I don't know how many clutches you have changed on old jeeps but if none then trust me it's noth worth the price of a disc to do it twice and if you are familiar with the process then you already know that. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
