Joined: Feb 26, 2011 Posts: 81 Location: Spanish in Venezuela
Posted: Sat Apr 23, 2011 1:06 pm Post subject: Main Bracket Cuno Oil Filter
Hello again, I have no cuno filter, but I made the main bracket.
My 3A bracket was broken and was missing a part. The reconstructed looking photos with the help of filter I have.
Later I saw the bracket for the M38 is different, so I decided to completely manufacture also looking photos.
With the original dimensions of that rebuilt and making appropriate changes drew new bracket.
Used as a template, a copy of the drawings, cut drilled and took a bend (bending do not have in my house)
I joined after bending, threading.
Was just getting the rubber protection for the passage of the hose.
I got an old "0ring, cut, pasted with Lock Tite and mounted on a wooden stand on the lathe, to make the channel setting on the oil filter bracket.
Painting and verify dimensions on the gasket.
These are the drawing that I drew up, if anyone is interested.
I do not guarantee the true dimension of the two big holes, as did so estimated from photographs.
DOL: (Doblar Otro Lado) bend the the other side
DEL: (Doblar Este Lado)bend this side
If anyone is interested in the CAD file will be a pleasure for me to send it to your mail. I have drawings of the model also CJ3A
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum