It is a wooden spacer used to provide a level surface for a radio mount when the original steel mounting area was not flat and smooth. I have Signal Corp drawings for SC-C-28599 and SC-c-28602 but I do not have the drawings for SC-C-28600 and SC-C-28601. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
I need to make this type of spacer for my M38. Exactly which spacer is correct for a VRC-10 installation in an M38, and is a drawing available? I’ve gone over the drawings in the Downloads section but, unless I’m missing something, cannot find this information.
My M38 came with 4 holes on the passenger side of the wheel well top, but I want to install on the driver's side.
They are correct for the VRC-8, 9, 10 in the M38/M38A1 on the left wheel house. There are two drawings for two different VRC-8, 9, 10 installations in the M38/M38A1.
You already have the correct wood spacers for the SC-D-28605 installation on the left wheel house. Just reverse their mounting to the right wheel house.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
