Joined: Oct 01, 2011 Posts: 33 Location: Burnaby BC Canada
Posted: Tue Jan 31, 2012 11:38 pm Post subject:
you can if a member go to the downloads over on the left in the navigation box and you should see a manula for that carb...Is it a YS carter type? same as M38A1? it is there
Joined: Oct 01, 2011 Posts: 33 Location: Burnaby BC Canada
Posted: Fri Feb 03, 2012 12:20 am Post subject:
Hi Rick I am not sure but I think that the carb for the M38 and M38A1 are both the same...?
You can look in the downloads section to the left on the web site here and look under M38 M38A1 there may be a manual there or try this site here okay?
http://www.archive.org/details/TM_9-2320-208-34P
The link I posted is for our web site's manual from our download page. The carbs are not the same. The M38 uses a YS637S and the M38A1/M170 use the YS950S. Larger throttle bore on the A1 and the carb inlets are oriented differently on each.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
