Joined: May 16, 2011 Posts: 385 Location: arkansas
Posted: Thu Dec 06, 2012 6:31 pm Post subject: power cable
looking for the correct power cable for the mt299 mount. what i understand it's the cable assembly co-212 about 8.5 foot long. thxs _________________ 1953 m38a1 1953 m100
CO-212 ID's the type cable used. The Part number for the cable is 3E7350.1-101.1 or SC-D-28372-5 which is two conductor 10' long. Three pin plug on one end to plug into receptacle on right side of the passenger seat and the other end is unfinished. The original installation was a shielded cable assembly and the shield was terminated as a wire on each end and connected to Pin B on the jeep and the ground lug in the MT299 temrinal box. The +24 heavy center wire connected to Pin A on the jeep and the 50 amp fuse cartridge in the MT299 terminal box.
This is the correct cable.
The lower unit is the correct connector. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum