View previous topic :: View next topic |
Author |
Message |
bl5211a Member
Joined: Dec 28, 2006 Posts: 344 Location: NC
|
Posted: Sat Aug 03, 2013 3:26 pm Post subject: clutch pressure plate 27/32" |
|
|
Clutch pressure plate 27/32"
Hello - how important is this to be exactly 27/32 and what is the best way to measure if i do not have the tool shown in manual?
brian
1955 m170 _________________ Brian
1955 M170
1940 BSA M20 |
|
Back to top |
|
|
bl5211a Member
Joined: Dec 28, 2006 Posts: 344 Location: NC
|
Posted: Sat Aug 03, 2013 4:53 pm Post subject: |
|
|
I was able to get a measurement.
one is 27/32 the other two are 28/32 or 7/8. Are the 28/32 a problem? _________________ Brian
1955 M170
1940 BSA M20 |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16355 Location: Wisconsin
|
|
Back to top |
|
|
bl5211a Member
Joined: Dec 28, 2006 Posts: 344 Location: NC
|
Posted: Sat Aug 03, 2013 9:15 pm Post subject: |
|
|
how do the clips come off to get to adjusting screws?
BRian _________________ Brian
1955 M170
1940 BSA M20 |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16355 Location: Wisconsin
|
|
Back to top |
|
|
bl5211a Member
Joined: Dec 28, 2006 Posts: 344 Location: NC
|
Posted: Sun Aug 04, 2013 7:21 am Post subject: |
|
|
I had the flywheel faced by machine shop.
i did notice the clutch pressure plate mounting surface does not sit flat between the two mounting bolts. It is resting on bolt mounting area.
Disc is new pressure plate is reused. not sure of the brand of pressure plate. _________________ Brian
1955 M170
1940 BSA M20 |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16355 Location: Wisconsin
|
|
Back to top |
|
|
bl5211a Member
Joined: Dec 28, 2006 Posts: 344 Location: NC
|
Posted: Mon Aug 05, 2013 3:57 pm Post subject: |
|
|
are you referring to TM9-8015-1 Engine and clutch..?
Brian _________________ Brian
1955 M170
1940 BSA M20 |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16355 Location: Wisconsin
|
|
Back to top |
|
|
|