Joined: Dec 03, 2013 Posts: 197 Location: Saint Augustine , Florida
Posted: Sat Apr 26, 2014 2:32 pm Post subject: fuel pump
I have a early fording system on my 38, the fuel pump has the primer handle, where the primmer handle attachs to the pump there is a vent like on the front and rear ends do I leave this vent or do I cap it off so it does't take in water when swimming buzz
The vent should have a built in check valve. The priming handle was not stock to the M38 fuel pump. It's an M38A1 thing. But you will see quite a few today on both jeeps. If you intend to actually "swim" deep ford your jeep you would be wise to upgrade her to the later sealed venting system. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Dec 03, 2013 Posts: 197 Location: Saint Augustine , Florida
Posted: Sat Apr 26, 2014 5:33 pm Post subject: fuel pump
I tried to up grade to the later I had it all hooked up w/ the later bell housing but the starters are different one early one late went to bolt the starter up and no go the holes were further apart come to find out the fly wheel is different between the years one has more teeth one less so all the money wasted buying parts going to try to sell them at aberdeen so that doesn't answer the question plug the fuel pump up or the axle vent buzz
I already answered that question. Read my first sentence again!
If you get dumb and plug the vent you will have other issues! _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
That's what I would do if I planned on swimming the jeep. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
This time of the year is my business (I am a self employed aircraft mechanic) which makes any recreational time very scarce. I usually can't get loose until July/August. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum