Posted: Tue Jun 16, 2015 10:43 pm Post subject: M38A1 AC fuel pump rebuild question (using Then and Now kit)
Hi all,
I'm just wrapping up installing the fuel pump rebuild kit I obtained from Then and Now automotive and had one question. There is a valve in the center section of the pump that seems to sit very high when the paper gasket is installed. I noticed there is no gasket shown in the exploded diagram and I assume this valve would be sealed by the diaphragm. Is this correct?
Joined: Feb 20, 2007 Posts: 606 Location: Illinois
Posted: Sat Jun 20, 2015 6:02 am Post subject:
Call Then and Now. They rebuilt my M38's gas/vacuum pump for me and its been working great for several years now. They know what is what. _________________ 1951 M38
Looking at the parts manual it appears there are not a gasket for every valve. Take a look and do a count yourself. Did you read thru the TM 9-1828A exerpts on this fuel pump on our downloads page? _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Nov 22, 2013 Posts: 8 Location: Waterdown ON
Posted: Sat Jun 20, 2015 5:25 pm Post subject:
I recently used the Then and Now kit to rebuild my M38 AC fuel pump. I did not use a gasket for that valve in the centre. The diaphragm is the seal for that valve. The fuel pump works great now😀 _________________ Justin R.
'52 M38 CDN
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
