Posted: Sat Feb 03, 2007 6:39 am Post subject: Floor Pan Drain hole locations
Hey
We have a member that needs floor pan drain hole photos and measurements. I am unable to get to me jeep for a while and wanted to see if we could help him out.
Thanks!
Ryan Miller _________________ Ryan Miller
MVPA # 22010
Posted: Sat Feb 03, 2007 6:31 pm Post subject: Dimensions etc
Now, all of you take this with a grain of salt. I realize that working on your jeep or other vehicles gives great satisfaction. We all take pride in saying we did it ourselves. However, when you look at the time, effort, and lack of good patterns to make the panels accurately, and put all the correct hardware back on them, why; wouldn't you purchase a panel that has all this done already and all you have to do is weld it in? I don't mean to sound trite or take anything away from you guys, it just doesn't make sense to me. For all the ass ache that I see in another post with just flat panels, no holes, no hardware. I realize that $ is always an issue, but for $250 you could have had them done accurately and ready to weld in.
I am not bitching, just trying to understand. Please don't flame me, just offer explanations.
Regards,
John
Joined: Dec 02, 2006 Posts: 115 Location: Bloomfield, New Jersey
Posted: Sat Feb 03, 2007 10:53 pm Post subject:
John: You are absolutely right! Why make more work for yourself. Sometimes it doesn't pay to do/make it yourself. A restoration is suppose to be fun and enjoyable! Enjoy yourself, life is too short!!! Regards, Dennis
Joined: Jan 10, 2006 Posts: 136 Location: Russellville, AR
Posted: Sun Feb 04, 2007 12:04 am Post subject:
John,
I am the member needing the hole location. These pans were put in about 3 years ago and that was before I knew about your panels. Had I known that there was a panel out there like you have I would have surley used them as the flat panels were a pain!
I understand where you are coming from and believe me if I had known about your panels when I purchased the panels back then I would have used yours. But since I have already welded these in im just trying to do the best with what I have.
Posted: Sun Feb 04, 2007 7:02 am Post subject: Hole locations
Ryan,
Since this computer is at home and not at the shop where the parts are, call me Monday and I will give you the dimensions you need.
Regards,
john
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum