Posted: Thu May 19, 2005 9:06 pm Post subject: M38 Hood Seam
When I took ownership of my M38, the seam in the center of the hood was filled in with bondo and smoothed out. Those of you who have seen a number of jeeps in your time, Do most or all of the jeeps or just some of the jeeps show the seam or are they filled in Wondering what I should do with mine. Go to the task of removing the bondo or leave it alone. All comments appreciated. _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
Remove the bondo. Seam should show. A little seam sealer in it probably wouldn't hurt, but the seam should show as far as I know. _________________ Ryan Miller
MVPA # 22010
Joined: Apr 14, 2005 Posts: 196 Location: Van Buren, Arkansas
Posted: Sat May 21, 2005 6:38 pm Post subject:
Mine came with a seam. It leaks, so when it's outside,
I put a small floor mat over the block to keep the
spark plug recesses from getting wet and rusting.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum