New TM additions to downloads section

Ryan_Miller

Cody Augustine dontated some more TM manuals in a downloadable format. I put the on the downloads section under M38 and M38A1

They are

TM 9-238 deep water fording
TM 9-1829 speedometers
TM 9-1828A Fuel Pumps
TM 9-1827C Brake, Lockheed Wagner

http://www.willysmjeeps.com/v2/modules.php?name=Downloads&d_op=viewdownload&cid=39
_________________
Ryan Miller
MVPA # 22010

wesk · Posted: Fri Apr 10, 2009 8:12 pm Post subject:

Thanks Cody!
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

Ryan_Miller · Posted: Fri Apr 10, 2009 8:28 pm Post subject:

Just got two more from Cody:

TM 9-2320-208-20P ORG PARTS TOOLS M38A1 M38A1C M170

And

TM 9-2320-208-34P DS GS PARTS M38A1 M38A1C M170

Same web address here on our downloads section as posted above
_________________
Ryan Miller
MVPA # 22010

wesk · Posted: Fri Apr 10, 2009 8:32 pm Post subject:

Now there's a hard to find parts Manual for the M38A1. The -34P replaced the ORD 9 and the -20 replaced the ORD 8.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

wesk · Posted: Fri Apr 10, 2009 10:53 pm Post subject:

Link doesn't work on Chg 7 to 8015-2
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

Ryan_Miller · Posted: Sat Apr 11, 2009 7:20 am Post subject:

Wes,

I just opened here at work. It downloads slow.
_________________
Ryan Miller
MVPA # 22010

Ryan_Miller · Posted: Sat Apr 11, 2009 8:08 am Post subject:

Hey,

I opened the wrong one: it is the 8014 change 7. I fix it tonight when I get off work.
_________________
Ryan Miller
MVPA # 22010

Ryan_Miller · Posted: Sat Apr 11, 2009 12:00 pm Post subject:

Hey,

I got it fixed over lunch. I checked it and it downloads.

Cool

_________________
Ryan Miller
MVPA # 22010

fra587 · Member Joined: Feb 18, 2009 Posts: 4

Looked around but couldn't find a place to input this. The data plate from my M38A1 is"weak but readable" , looks like MD 62657, title says VIN 806279W1C 1953 M38A1. Seller says it spent most of its life at Ft Campbell. KY. When I signed up, there was a reminder to provide some data on the Jeep, but I waited until I got the old data plate. Mine has a new plate with nothing on it. Does anyone have the numbers stamped/engraved on the new plates? Thanks for all the work you guys do !!!. Frank//fra587

wesk · Posted: Mon Apr 13, 2009 7:53 pm Post subject:

Hello Frank,
Thanks for the data. I find it interesting what was used for the VIN on the title. Years ago most cars were titled using the engine serial number. That number on your title is the M38A1 engine casting number which is found on the right side of the block down near the oil pan on about 100,000 M38A1 engines. That is an error you should try to correct. The VIN should be either MD62657 or the engine's serial number which is up on that small flat above the water pump. Right now your VIN probably matches about 1000 currently registered M38A1's.

Engine's serial number location.

This is where you'll find the patent plate behind the passenger seat. It should match the dash serial plate number.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.