Posted: Sun Dec 13, 2009 12:55 pm Post subject: metal brake line length
Hello, I have acquired a 1955 MD pile of parts and I need some info. What is the length of the metal brake line from the master cylinder to the junction block on the axle housing? Also, the line to the flex hose on the left front from the same junction block, how long is it? The diagram in ORD 9 does not give the measurements that I can see. Any help or advice appreciated. Thanks, Robert
For the benefit of all here I'll post Joel Gopan's reply to Robert on the G503 site:
Quote:
Joel Gopan wrote: 806163 Master Cylinder to junctio block = 36*
801393 Junction Block to left flex line = 6-1/2"
I have these NOS but are out in the barn (bought them from Jeep 40 years ago when I was restoring and building NOS M-38A1 Jeeps), to be on the safe side use the above for developed length after double flaring.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
