Posted: Sun Jan 01, 2012 3:46 pm Post subject: What is diameter of fuel line going into fuel pump on CJ3A?
Is fuel line going into the fuel pump 1/8" or 1/4"? My fuel line (rom my tank between my frame rails in the rear) is 5/16" so I've got to reduce going into the fuel pump. Need to make sure I get the size right and I can't tell just looking at the female compression 90 degree on the fuel pump.
Joined: May 14, 2009 Posts: 971 Location: South Dakota
Posted: Sun Jan 01, 2012 5:55 pm Post subject:
The fuel line on mine, which was original, is 1/4 inch. The threads going into the pump body itself are 1/8 inch pipe thread. If you stay 1/4 all the way, you need 1/4 inch inverted flare on the brass. Are you measuring ID or OD of the pipe? Hard plumbing or pipe fittings are ID ,Tubing is OD. So, bendable tubing would be measured on the outside diameter. The ends are double flared like brake line tubing. Inverted flare brass fittings accept this type tubing ends. Hope this helps, John
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum