View previous topic :: View next topic |
Author |
Message |
RICKG Member
Joined: Aug 31, 2010 Posts: 1741 Location: SO IDAHO
|
Posted: Wed Apr 11, 2012 11:35 am Post subject: HEAD STUD SEALANT |
|
|
Would a guy be better off using Permatex 1 (hardening)
or permatex 2 (non-hardening) to seal coolant leaks @
head studs. Both 1 and 2 are mentioned in previous posts. _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a |
|
Back to top |
|
|
evanso1975 Member
Joined: May 10, 2010 Posts: 615 Location: North Yorkshire, UK
|
Posted: Wed Apr 11, 2012 1:21 pm Post subject: |
|
|
From the Permatex website:
Permatex® Form-A-Gasket® No. 1 Sealant
Fast-drying, hard-setting sealant designed for sealing rigid materials and flanges, or patching holes and joints where permanent assembly is desired. Temperature range -65°F to 400°F (-54°C to 204°C); resists common shop fluids and fuels.
Suggested Applications: Freeze plugs, threaded connections, manifold gaskets
Permatex® Form-A-Gasket® No. 2 Sealant
Slow-drying, non-hardening sealant designed for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. Temperature range -65°F to 400°F (-54°C to 204°C); resists common shop fluids and fuels. Use where sealing is more important than adhesion.
Suggested Applications: Valve cover gaskets, oil pan gaskets
That bit I highlighted in bold text should answer your question. However, as with all questions in life the manufacturer should know best.
Their contact details are here:
http://www.permatex.com/about_contact.htm
Wbr,
Owen. _________________ Owen
1951 US Air Force M38
1944 F-1 1/2-ton Airdrome Trailer
1940 C15 Chevrolet CMP 11-cab
1939 DKW KS200 Motorcycle
MVT # 19406 |
|
Back to top |
|
|
artificer Member
Joined: Feb 16, 2007 Posts: 206 Location: Gold Coast Australia
|
Posted: Wed Apr 11, 2012 9:52 pm Post subject: |
|
|
Any GM dealer will have head/thread stud sealer in a 4oz can. Dip studs in sealnt & screw in finger tight into block ensuring all threads are @ the deck level [do not torqe the studs by double nutting or any other method]. _________________ John GIBBINS
ASE Master Medium/Heavy Truck & Auto Technician 2002 USA
Licensed Motor Mechanic NSW # MVIC 49593 Current
YOU CAN'T TROUBLESHOOT WHAT YOU DON'T UNDERSTAND |
|
Back to top |
|
|
RICKG Member
Joined: Aug 31, 2010 Posts: 1741 Location: SO IDAHO
|
Posted: Thu Apr 12, 2012 9:15 am Post subject: |
|
|
Permatex tech support recommends neither 1 or 2.
They recommend #59214 hi-temp thread sealant.
Napa Balkamp # 765-2648 (4 mil tube), 765-1155 (50 mil tube). _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a |
|
Back to top |
|
|
53a1 Member
Joined: Jun 25, 2008 Posts: 583 Location: Kern Co.
|
Posted: Thu Apr 12, 2012 2:50 pm Post subject: |
|
|
I used the #59214 high temp thread sealant. Haven't had a problem yet. I also use the same stuff on all my pvc plumbing.
Just a guess but if I were to choose between the hardening & non-hardening I'd go with the non-hardening in the chance it might mess up the threads if you remove the studs. Plus when you re-torque, you need it to be pliable. _________________ '53 M38A1 X2 |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16265 Location: Wisconsin
|
Posted: Fri Apr 13, 2012 1:02 am Post subject: |
|
|
Remember you do not torque or retorque head studs. You torque and retorque head nuts on an L134. The stud is not suppose to move during either process so a hardening sealer on the threads is not an issue.
I've used Permatex 1 for 40 years without any problems. Yes there are newer, fancier and more specific products today that even cost more but are not really necessary on this 3/4 century old engine. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
Back to top |
|
|
skyjeep50 Member
Joined: Feb 20, 2007 Posts: 606 Location: Illinois
|
Posted: Sat Apr 14, 2012 7:41 am Post subject: |
|
|
I used the Permatex high-temp sealant on my M38 engine studs but after having some leakage issues went back to Permatex #1. The high-temp stuff was a rather thin, almost watery compound and the coarse threads of the studs seemed to me to require a thicker sealant. I'm sure the high temp sealer is good stuff for fine threads but maybe not coarse thread head studs installed finger tight - just my 2 cents. _________________ 1951 M38 |
|
Back to top |
|
|
53a1 Member
Joined: Jun 25, 2008 Posts: 583 Location: Kern Co.
|
Posted: Sun Apr 15, 2012 10:53 pm Post subject: |
|
|
Thanks for pointing out my error Wes. I have head bolts not studs so the stuff I'm using is probably is not the best. FYI, you have to knead the tube before using the high-temp stuff or it's too runny. _________________ '53 M38A1 X2 |
|
Back to top |
|
|
|