Joined: Mar 11, 2012 Posts: 55 Location: minnesota
Posted: Wed Apr 10, 2013 5:52 pm Post subject: jumper recepticle on pass fender
I have a 3/52 m38 and need a 2 wire set up. Is bendix correct? Do I need one to ground to the fender or to the frame? where can I get one and a price?
thanks _________________ 3/52 M38 ser#59697 hood#20908270
It's called a slave receptacle ORD# 7731421 and sells as a kit. I don't know anyone stocking the correct M38 cable length. The most common kit out there has a 40" + cable and 11" - cable. The + wire goes to the starter switch terminal on the starter. The - wire goes to the front support bolt for the starter. If you can get a receptacle then make your own wires from 2 AWG cable. The + cable is 29" and the - cable is 33".
Also remember they came in early and late receptacles as in single pin or two pin (both of which have two cables). _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Apr 14, 2005 Posts: 285 Location: Livermore Ca.
Posted: Wed Apr 10, 2013 10:07 pm Post subject:
bendix is the proper early one for show, but there all the same _________________ '51 M38 #22936,
'51 M100 Dunbar
#01164782
'53 M100 Dunbar
M416b1
2- M762
MVPA #11788
MVCC LIFER
Joined: Aug 31, 2010 Posts: 1741 Location: SO IDAHO
Posted: Thu Apr 11, 2013 2:00 pm Post subject:
I've got one for sale-PM if you're interested i will get
you particulars and pics.. _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum