Joined: Jul 24, 2014 Posts: 80 Location: Fort Bliss Texas
Posted: Sun Feb 22, 2015 12:18 pm Post subject: Fording valve crossover pipe
So, I got to connect to some interwebz for a bit and, of course, the first thing I did was start looking for M38 stuff. Wanted to see if anyone could tell me if this would be correct fording valve for a M38 or just an M38A1
I would search, I would look through the TMs ... but I have limited time on a computer for now sorry!
I reduced the size of your photo to eliminate the widening of the screen requirement for the rest of us to view it. Try to limit your photo sizes to less than 200K file sizes.
If you will take a short while and download the PDF manuals to a carry around device you will then always have them at your disposal. The answer I provided came from these manuals which are free to you.
Wes K _________________ Aaron Ray
1952 M38
MC71767
That's for an A1. The M38 unit is ORD# 7375130, WO# 801582
Here's the M38A1 unit
This is the M38 unit.
The vent valve is ORD# 7410836 which is correct for the A1 and was the later valve used on the M38. So if you only need the valve then buy it and sell the crossover tube to an A1 guy, _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Aug 31, 2010 Posts: 1741 Location: SO IDAHO
Posted: Sun Feb 22, 2015 7:20 pm Post subject:
Aaron, ya good to hear from you!!
Note that G758 will be M38A1.
Look for G740 when you're looking for M38 specific. _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum