Joined: Feb 15, 2018 Posts: 12 Location: cebu philippines.
Posted: Mon Jun 25, 2018 10:07 pm Post subject: L134 sump pan guard .
At the front end of the sump pan ,sits a small guard /drip plate ,with 6 bolt holes . (goes under the front crank pulley) Mine looks as though it was put together in a hurry by a previous owner . Does anone have a diagram or sketch of how it should be fitted .It looks as though it should have spacers .....possibly with longer fixing bolts .
Have you visited the M38's ORD 9 SNL G-740 parts manual yet? The illustration on page 12 is great.
On page 47 you will find the oil pan listed with 20 attaching bolts. 14 of them are 5/16-18NC-2x5/8" and 6 are 5/16-18NC-2x1". Ignore the superseding 1/8" that's a typo. Should be 1 1/8".
Then on page 28 they hid the SHIELD, Pulley and it's 6 spacers. Note: the spacers lack any dimensional info.
Our guys can always help!
Steel, ID 0.4665-0.4685, OD 0.5615-0.5635, length 0.6865-0.6885
If you do not yet own a copy of this M38 parts manual go to our "Downloads Page" and download a PDF copy free"
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum