Author |
Message |
Topic: Brake Light Switch |
M38MN
Replies: 6
Views: 4418
|
Forum: Technical Knowledge Base Posted: Tue Sep 24, 2019 8:43 am Subject: Brake Light Switch |
I plan on renting, borrowing or buying a pressure test set and verify the pressure at the port before I continue on with any more switches. I'm thinking I may still need to get a low pressure switch ... |
Topic: Brake Light Switch |
M38MN
Replies: 6
Views: 4418
|
Forum: Technical Knowledge Base Posted: Mon Sep 23, 2019 7:24 am Subject: Brake Light Switch |
I have not checked the pressure from the Master Cylinder. I did a check ride with the previous owner and at 45 MPH the brakes (which are all new) worked well. When driving around (after buying) down ... |
Topic: Brake Light Switch |
M38MN
Replies: 6
Views: 4418
|
Forum: Technical Knowledge Base Posted: Sun Sep 22, 2019 6:11 pm Subject: Brake Light Switch |
I'm on my 3rd new brake light switch. Lights and wiring are good, verified by using a jumper wire. With no continuity across terminals I bought a new switch. Installed with the same results. Called ... |
Topic: Horn Switch Adapter |
M38MN
Replies: 8
Views: 6257
|
Forum: Technical Knowledge Base Posted: Wed Sep 11, 2019 12:15 pm Subject: Horn Switch Adapter |
Task completed. Thank you all for the information. |
Topic: Horn Switch Adapter |
M38MN
Replies: 8
Views: 6257
|
Forum: Technical Knowledge Base Posted: Wed Sep 04, 2019 2:34 pm Subject: Horn Switch Adapter |
Not as of yet. I just pulled the rubber button off and tried to get a 48" x 1/8" rod down the shaft trying to find the tube using a piece of leather cut into a 5/8" circle as a centering guide. I kno ... |
Topic: Horn Switch Adapter |
M38MN
Replies: 8
Views: 6257
|
Forum: Technical Knowledge Base Posted: Wed Sep 04, 2019 11:29 am Subject: Horn Switch Adapter |
Thank you all for the information. I'm going to try a pipe wrench to see if I can twist the adapter loose, if not then I'll be digging a hole to remove the assembly. And based on the picture from Wes ... |
Topic: Horn Switch Adapter |
M38MN
Replies: 8
Views: 6257
|
Forum: Technical Knowledge Base Posted: Tue Sep 03, 2019 7:09 pm Subject: Horn Switch Adapter |
Just bought my 1st Jeep [M38] and I'm trying to fix the horn. It is/was a dash push button but I want it back in the steering wheel. I removed the switch for multiple reasons. There was no hole for ... |
|