Search found 40 matches

Thanks Wes! That is the only photo I've ever seen with that type of cushion on the Mule.

Here they are now:

http://willysmjeeps.com/v2/modules/gallery/albums/Seat_Cushion/IMG_5415.jpg

http://willysmjeeps.com/v2/modules/gallery/albums/Seat_Cushion/IMG_5416.jpg

http://willysmjeeps. ...

Received a military OD canvas seat cushion. Appears to be for the back of the seat. Has a pocket with two snaps that fit over the back of the seat and a canvas flap with snap on each side near the bot ...

Has anyone done this before? I ground down the visible welds, but the bushing will not budge.
I'm beginning to suspect that it's actually part of the boxing, like it was all welded together before th ...

Not the brackets. Not the brackets.

The threads inside the frame for the front shackles are stripped. The previous owner had swapped out to modern H shackles.

Anyone have instructions on how to ...

Looking for the two longer bolts that go under the lifting hook.
WO# 806206, ORD# 8329678, Bolt, 7/16-14NC-3x4 5/8" 2 each.
Thanks

Dzus (pronounced Zeus) fasteners and SEM's fasteners are the trade names for the dash fasteners.

I'm talking about the main dash panel that goes the entire width of the Jeep and is held in place wi ...

Manual says "1/4-20 NC - 2 x 5/8" ... so does that mean 2-5/8" or something else? like grade 2, 5/8" length?

Manual seems to call for a 2-5/8 hex hd screw for this? That seems absurdly long and does not match what we pulled off the M170. Is there a more updated screw for a 1962 M170?

since they are so few, could we start a thread of vintage service photos of the M170 ambulance?

please

I called midwest jeeps, they are getting tooling ready to start building battery boxes.

Wonder how far off in the future this will be. We'll be needing one too eventually.

Think I found them, but as complete sets only?

PdB has them listed as WO-120129

Walcks has them for the Civvy Jeeps as 120239

Any differences other than the numbers?

Are there any replacements available for the Shoe Hold Down Spring, Seat and Pins?

I'm not seeing them at the usual Jeep vendors.

Wes - where are you getting those dimensions? When I look up those parts on the NAPA site, they aren't matching up. I can't seem to fine any that are actually .44 wide

Part Number: NBH 257448
Prod ...


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.