| Author |
Message |
 Topic: M38 Excelerator pump issue? |
iceman7273
Replies: 9
Views: 9483
|
 Forum: Technical Knowledge Base Posted: Tue Aug 26, 2014 11:17 pm Subject: M38 Excelerator pump issue? |
I played with alittle more timing and it drives great. Thanks for the info...
Pat |
| Topic: M38 Excelerator pump issue? |
iceman7273
Replies: 9
Views: 9483
|
Forum: Technical Knowledge Base Posted: Tue Aug 26, 2014 12:23 pm Subject: M38 Excelerator pump issue? |
Then and Now in MA did my carb and fuel pump. I thought they did a great job, big improvement. Just another option.
They did my fuel pump also. What the carb cost to do? |
| Topic: M38 Excelerator pump issue? |
iceman7273
Replies: 9
Views: 9483
|
Forum: Technical Knowledge Base Posted: Tue Aug 26, 2014 8:16 am Subject: M38 Excelerator pump issue? |
| Besides what Wes said, make sure the metering rod picks up out of the jet the moment the linkage advances off idle. Otherwise, there is no fuel at that point in time to run on. Your accelerator pump ... |
| Topic: M38 Excelerator pump issue? |
iceman7273
Replies: 9
Views: 9483
|
Forum: Technical Knowledge Base Posted: Mon Aug 25, 2014 11:17 pm Subject: M38 Excelerator pump issue? |
| I just got my jeep running. I just put new points, condenser, coil, cap and rotor. Along with a few new car parts. I have a carter WO on the jeep. I timed the engine to the ignition mark on the flywhe ... |
| Topic: Looking for Pictures of the M38 wiring. |
iceman7273
Replies: 11
Views: 13317
|
Forum: Technical Knowledge Base Posted: Sun Aug 10, 2014 11:39 pm Subject: Looking for Pictures of the M38 wiring. |
| Wes, do you have any pictures of the wiring harness running from the front to the rear under the tub? Anyone know where I can find the fender blackout wire clips? |
| Topic: Looking for Pictures of the M38 wiring. |
iceman7273
Replies: 11
Views: 13317
|
Forum: Technical Knowledge Base Posted: Sun Aug 03, 2014 11:14 pm Subject: Looking for Pictures of the M38 wiring. |
I am looking for pictures of the M38 wiring. I have most of it firgured out just would like something to go off of for reference. Thanks
Pat |
| Topic: M38 ignition switch (need help with 2 wire numbers) |
iceman7273
Replies: 4
Views: 5386
|
Forum: Technical Knowledge Base Posted: Sun Aug 03, 2014 11:09 pm Subject: M38 ignition switch (need help with 2 wire numbers) |
Thanks guys. I got it ohmed out
Pat |
| Topic: M38 ignition switch (need help with 2 wire numbers) |
iceman7273
Replies: 4
Views: 5386
|
Forum: Technical Knowledge Base Posted: Sat Aug 02, 2014 11:12 pm Subject: M38 ignition switch (need help with 2 wire numbers) |
I was wonder what the 2 wire numbers are? They are missing the tags. Any help would be great.
http://i128.photobucket.com/albums/p195/iceman7273/M38/DB4DE09F-84A7-4F34-9E61-6329558E08A4_zpsgg2nyjq ... |
| Topic: M38 lower battery box frame mount |
iceman7273
Replies: 0
Views: 2872
|
Forum: Wanted Posted: Sat Aug 20, 2011 8:00 am Subject: M38 lower battery box frame mount |
| The bottom of the battery box frame mount was cut off my frame when I got the jeep. Does anyone have the lower frame that supports the battery box? I have not come across a repo either, just the box f ... |
| Topic: Wanted: M38 parts listed |
iceman7273
Replies: 0
Views: 3024
|
Forum: Wanted Posted: Thu Aug 18, 2011 8:56 pm Subject: Wanted: M38 parts listed |
M38 Radiator
Oil Bath air filter
Blackout lights rear and front
Snorkel fender bracket
Crossover tube
Blackout light fender
Front bumper lift shackles
Rear lift shackles
Vacuum wipers |
| Topic: WANTED****M38 Engine Lifting Plate |
iceman7273
Replies: 0
Views: 3164
|
Forum: Wanted Posted: Sun Jan 02, 2011 9:28 pm Subject: WANTED****M38 Engine Lifting Plate |
M38 Engine Lifting Plate, Please pm me if you have what i am looking for, Midwest sells repo for 45.00. Looking for cheaper
Patrick |
| Topic: Whats the worst "bubba mod" you have come across? |
iceman7273
Replies: 74
Views: 192948
|
Forum: Technical Knowledge Base Posted: Sat Nov 13, 2010 9:53 pm Subject: Whats the worst "bubba mod" you have come across? |
Wow iceman...seems Bubba perfected his artwork on your jeep...
Do these guys even bother to clean the metal before welding? Or even grind down what they do weld.
 ......Not Clean, over gre ... |
| Topic: Whats the worst "bubba mod" you have come across? |
iceman7273
Replies: 74
Views: 192948
|
Forum: Technical Knowledge Base Posted: Mon Nov 08, 2010 2:47 pm Subject: Whats the worst "bubba mod" you have come across? |
| Stuff i found on my M38 when i started rebuilding it, the welds and bubba mods are horrible also found electrical wire used for throttle cable and used for shims in the clutch arm....Spent months fixi ... |
| Topic: Questions about stock spring hangers,bushings and springs |
iceman7273
Replies: 4
Views: 5617
|
Forum: Technical Knowledge Base Posted: Sun Nov 07, 2010 10:58 pm Subject: Questions about stock spring hangers,bushings and springs |
| Great info Wes, why is the spring side threaded? The leaf it self isn't threaded is it? |
| Topic: Questions about stock spring hangers,bushings and springs |
iceman7273
Replies: 4
Views: 5617
|
Forum: Technical Knowledge Base Posted: Sun Nov 07, 2010 8:43 pm Subject: Questions about stock spring hangers,bushings and springs |
| I found out i have the Rancho RS44010 springs on my m38 jeep. They are 1" higher than stock. I am going to keep the springs on the jeep for now. When i got the jeep the spring bushings were gone and i ... |
| |
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
