Author |
Message |
Topic: wiring woes |
maydaymurph
Replies: 12
Views: 8786
|
Forum: Technical Knowledge Base Posted: Tue Jul 31, 2018 11:50 pm Subject: Grounded welll |
Thanks Wes, but for once (and it doesn’t happen often) I’m a step ahead. I we went back and attended to every ground. I’ve actually got the engine to frame and body double grounded.
As usual you are ... |
Topic: wiring woes |
maydaymurph
Replies: 12
Views: 8786
|
Forum: Technical Knowledge Base Posted: Tue Jul 31, 2018 6:12 pm Subject: Wiring woes solved |
To say the least, it has been an adventure in wiring 101,2,3 etc.
mdainsd, I went back and unscrewed the grounds and took a dremel rotary wire wheel and removed some of the four coats of paint and re ... |
Topic: wiring woes |
maydaymurph
Replies: 12
Views: 8786
|
Forum: Technical Knowledge Base Posted: Mon Jul 30, 2018 9:33 pm Subject: Grounds on headlights |
mdainsd, can do will do. That’s a good possibility. I’ve repainted everything and now that you have reminded me; I’m not really sure if I scored the paint when I replaced the grounds. I’ll get that ch ... |
Topic: wiring woes |
maydaymurph
Replies: 12
Views: 8786
|
Forum: Technical Knowledge Base Posted: Sat Jul 28, 2018 8:27 pm Subject: wiring woes update |
All right one and all, Just went back to the jeep and disconnected, cleaned post thoroughly, checked wire markers and reconnected them all. Now the Service Drive lights work as they should with the pa ... |
Topic: wiring woes |
maydaymurph
Replies: 12
Views: 8786
|
Forum: Technical Knowledge Base Posted: Sat Jul 28, 2018 7:22 pm Subject: Wiring Woes M38 |
wow mdainsd, sounds like . you have had just as much fun as I am now. I'm a bit buffaloed by this one . I bought a late model M38 three light switch and simply pushed the male multi pin plug in and ... |
Topic: wiring woes |
maydaymurph
Replies: 12
Views: 8786
|
Forum: Technical Knowledge Base Posted: Sat Jul 28, 2018 6:41 pm Subject: Wiring Woes M38 |
s far as reading the chart, I Did. BUT, in service drive the panel lights go out. as I stated in the previous msg. and I have panel lights in Black out drive and Black out park. I also have panel ligh ... |
Topic: wiring woes |
maydaymurph
Replies: 12
Views: 8786
|
Forum: Technical Knowledge Base Posted: Fri Jul 27, 2018 7:45 pm Subject: wiring woes |
well obviously I'm back again. I've been working on the wiring on my 52 M38 and have finally got the whole front of the jeep connected. But, (doesn't there always seem to be a but in the mix?)
1 ... |
Topic: cleaning a data plate |
maydaymurph
Replies: 6
Views: 7274
|
Forum: Technical Knowledge Base Posted: Fri Jul 27, 2018 5:42 pm Subject: cleaning a data plate |
Howdy one and all! Hey Zeke57, tried the sanding block and it worked pretty darn good except on one plate that has a bit of a bow in it. a tractor refinisher who works with emblems and such said to u ... |
Topic: cleaning a data plate |
maydaymurph
Replies: 6
Views: 7274
|
Forum: Technical Knowledge Base Posted: Thu Jul 26, 2018 7:27 pm Subject: cleaning a data plate |
Most of the google searches I've read want to use a chemical stripper of one kind or another.
Zeke57. I've got some 2000 grit on hand I'll give that a try sounds like that might work, thanks
and tha ... |
Topic: cleaning a data plate |
maydaymurph
Replies: 6
Views: 7274
|
Forum: Technical Knowledge Base Posted: Wed Jul 25, 2018 10:08 pm Subject: cleaning a data plate |
Howdy all, Wesk has been urging me to post on here rather than emailing him directly so that everyone may benefit/input on what ever subject matter I may inquire about or bring to the forum. So here g ... |
Topic: koenig top |
maydaymurph
Replies: 1
Views: 4594
|
Forum: For Sale Posted: Fri Aug 29, 2014 6:21 pm Subject: koenig top |
Have most of a Koenig Arctic top. both doors the L&R sides and the top itself all are rough ie dirty cracked glass. but windows still work and door latches functional. small repairable hole in top ... |
Topic: The Big Paint dilema |
maydaymurph
Replies: 2
Views: 34659
|
Forum: Technical Knowledge Base Posted: Sat Oct 27, 2012 9:51 pm Subject: The Big Paint dilema |
Howdy to one and all,
I have heard and read all the debate about who has what and what should be on which and when. Now here is the deal. As I am told that a 1952 M38 should have been shot with 243 ... |
Topic: Brent Mullins Website gone? |
maydaymurph
Replies: 3
Views: 8241
|
Forum: M Series Parts Supply & Service Review Posted: Wed Jul 04, 2012 9:23 pm Subject: Brent Mullins Website gone? |
Howdy and Happy Birthday AMERICA!!!
Just went to the mullinsjeepparts.com W/O any problems. So it seems to be up and running. got negative problems for any virus /spamware/malware/etc.
L. Murph ... |
Topic: Need M38 glove box cover. |
maydaymurph
Replies: 1
Views: 4172
|
Forum: Wanted Posted: Fri Jun 29, 2012 12:37 am Subject: Need M38 glove box cover. |
Howdy, I got a glove box cover in retty good shape no push button latch. little rusted but should clean up nicely. If you need it Make me an offer. or if you got spare stuff we can maybe trade to help ... |
Topic: Rebuild for dummies |
maydaymurph
Replies: 4
Views: 8227
|
Forum: Technical Knowledge Base Posted: Mon May 21, 2012 10:00 pm Subject: Rebuild for dummies |
Howdy Wes, Once again the voice of wisdom. I am purchasing the rebuilders manual from what I see online it is the manual i've been looking for.
My compliments Sir,
I thank you kindly,
L. Murphy 52 ... |
|