Author |
Message |
Topic: Rich Mixture |
spad
Replies: 2
Views: 4823
|
Forum: Technical Knowledge Base Posted: Wed Jul 10, 2019 8:40 am Subject: Rich Mixture |
Thx for the reply. Sorry for the delay, I've been out of pocket awhile. Definitely too much fuel, while working on it the carb has no air filter. |
Topic: Rich Mixture |
spad
Replies: 2
Views: 4823
|
Forum: Technical Knowledge Base Posted: Mon Jul 01, 2019 2:54 pm Subject: Rich Mixture |
I have rich mixture on a YF Carter Carb and my mixture adjust is all the way in. Does this sound like a misaligned float or what? Engine starts ok and runs, but quickly fouls the plugs. |
Topic: M38A1 Auto-Lite ignition coil |
spad
Replies: 4
Views: 4415
|
Forum: Technical Knowledge Base Posted: Mon May 20, 2019 7:13 am Subject: M38A1 Auto-Lite ignition coil |
Well, it seems to allow me to link in this morning with no issues. Guess my registration process hadn't completely finished before I started trying to use all of the functions. Once again thanks for ... |
Topic: M38A1 Auto-Lite ignition coil |
spad
Replies: 4
Views: 4415
|
Forum: Technical Knowledge Base Posted: Sun May 19, 2019 11:17 pm Subject: M38A1 Auto-Lite ignition coil |
Thank you Wes for the response. The measurement was made at room temperature. I'll warm it up tomorrow and make another measurement. Also I tried to look/click on your links, but the system wouldn' ... |
Topic: M38A1 Auto-Lite ignition coil |
spad
Replies: 4
Views: 4415
|
Forum: Technical Knowledge Base Posted: Sun May 19, 2019 10:32 pm Subject: M38A1 Auto-Lite ignition coil |
My M38A1 24 volt Auto-Lite distributor ignition coil reads primary 6 ohms and secondary 14,000 ohms, is this satisfactory? The spark seems a little weak too me. Any thoughts? |
|