Author |
Message |
Topic: Oil Pressure Problem |
steveh
Replies: 4
Views: 6249
|
Forum: Technical Knowledge Base Posted: Wed Jul 04, 2007 12:05 pm Subject: Oil Pressure Problem |
Thanks for the great reference, Wes. After reviewing the items in the posting, I still believe that the pump is probably the problem. Your point about the wear in the pump housing could be the culpr ... |
Topic: Oil Pressure Problem |
steveh
Replies: 4
Views: 6249
|
Forum: Technical Knowledge Base Posted: Wed Jul 04, 2007 6:18 am Subject: Oil Pressure Problem |
I have finally finished my M-38 project and have it on the road. The engine was completely rebuilt by a firm in which I have great confidence. When I drive it, I only start out with between 10 and 1 ... |
Topic: Wooden hood blocks |
steveh
Replies: 2
Views: 4826
|
Forum: Technical Knowledge Base Posted: Thu May 03, 2007 6:31 pm Subject: Wooden hood blocks |
Thanks Thomas. That is exactly what I needed.
Steve
M-38 61702 1952 |
Topic: Wooden hood blocks |
steveh
Replies: 2
Views: 4826
|
Forum: Technical Knowledge Base Posted: Wed May 02, 2007 1:45 pm Subject: Wooden hood blocks |
Could someone provide the deminsions of the wooden blocks for the front of the hood of an M-38?
Thanks
SteveH
52 M-38 |
Topic: wind shield gasket |
steveh
Replies: 10
Views: 9905
|
Forum: Technical Knowledge Base Posted: Thu Apr 26, 2007 5:28 am Subject: wind shield gasket |
Thanks, Wes. I'll look it up.
Steve |
Topic: wind shield gasket |
steveh
Replies: 10
Views: 9905
|
Forum: Technical Knowledge Base Posted: Wed Apr 25, 2007 2:52 pm Subject: wind shield gasket |
I am at about the point where I will be installing a glass in my M-38. I am interested in knowing more about the tool designed for the job. Where might one find one of these tools and how is it used ... |
Topic: L-134 Rebuilding Shop in PA |
steveh
Replies: 2
Views: 5221
|
Forum: Technical Knowledge Base Posted: Sun Apr 22, 2007 6:06 am Subject: L-134 Rebuilding Shop in PA |
Hi Bob
Mine had a hole in the side of the block where a rod went through and I took to a commercial industrial rebuild shop and they fixed the hole and rebuilt the engine. They did an outstanding ... |
Topic: Wes' admin duties |
steveh
Replies: 11
Views: 14282
|
Forum: Announcements, News, Humor Posted: Wed Mar 07, 2007 5:20 am Subject: Wes' admin duties |
I just checked into the website and realized you down for maintenance. Hang in there! I'll be thinking about you.
Steve |
Topic: Another Carburator Problem |
steveh
Replies: 5
Views: 7257
|
Forum: Technical Knowledge Base Posted: Mon Feb 26, 2007 6:18 am Subject: Another Carburator Problem |
Wow. I would have never found the gasket problem. The gasket that came with the kit did not have the metal flange. I will get one. Thanks.
I am not familiar with the propane test. I am interes ... |
Topic: Another Carburator Problem |
steveh
Replies: 5
Views: 7257
|
Forum: Technical Knowledge Base Posted: Sun Feb 25, 2007 7:06 am Subject: Another Carburator Problem |
I have gotten mm M-38 jeep running and it starts and runs very well, however, it will only run smoothly on about 1/4 to 1/2 choke. As I would expect it needs a bit more choke when the engine is cold ... |
Topic: New wiring harness - what comes with it? |
steveh
Replies: 10
Views: 11314
|
Forum: Technical Knowledge Base Posted: Sun Feb 25, 2007 6:46 am Subject: New wiring harness - what comes with it? |
I echo the above comments and throw out the name of Vintage Wiring of Main. I recently bought a set for my m-38 and was verry pleased with the communication, the booklet that came with it and the ult ... |
Topic: M-38 Ground Strap |
steveh
Replies: 2
Views: 4993
|
Forum: Technical Knowledge Base Posted: Sun Feb 18, 2007 1:52 pm Subject: M-38 Ground Strap |
Is there a ground strap that connects between the engine/drivetrain and the frame? If so, where does it attach?
Thanks
SteveH
M-38 '52 #61702 |
Topic: Salvage Front Crossmember |
steveh
Replies: 1
Views: 9383
|
Forum: Wanted Posted: Sat Jan 27, 2007 4:22 pm Subject: Salvage Front Crossmember |
I would like to throw my 2 cents worth in regarding a junk frame. I am looking for a front battery support that attaches to the front crossmember and also to the right main frame. If you have one th ... |
Topic: M38 Battery Platform |
steveh
Replies: 3
Views: 5051
|
Forum: Technical Knowledge Base Posted: Fri Jan 05, 2007 11:33 am Subject: M38 Battery Platform |
Does anyone know where I can get the platform that sits on the frame on which the engine compartment battery sits (support, batter w/brace - # 7347736). Mine has been cut off and completely gone.
... |
Topic: Underwater Ventilation Parts |
steveh
Replies: 1
Views: 4877
|
Forum: Technical Knowledge Base Posted: Wed Jan 03, 2007 12:26 pm Subject: Underwater Ventilation Parts |
I am interested in putting the underwater ventilation system on my M-38 back in working order but both Beechwood Canvas and Peter Debella do not have the parts on hand. I need the Ventilation control ... |
|