| Author |
Message |
 Topic: Tie Rods - Crown vs NOS |
w30bob
Replies: 3
Views: 4127
|
 Forum: Technical Knowledge Base Posted: Wed Oct 10, 2018 7:23 am Subject: Tie Rods - Crown vs NOS |
Hi Guys,
Looking for some info on tie rod ends for my A1. I learned from you guys that Crown makes good quality jeep parts. Can anyone comment on the quality of their tie rod ends as compared to N ... |
| Topic: Help needed with wiper blade install |
w30bob
Replies: 7
Views: 6573
|
Forum: Technical Knowledge Base Posted: Sun Oct 07, 2018 8:33 am Subject: Help needed with wiper blade install |
Hi Ron,
Here's what I've got. Now I think the screw that hits the top of the blade is supposed to be a rivet.......I think my arms are new reproductions, which use a screw instead of a rivet. I've ... |
| Topic: Help needed with wiper blade install |
w30bob
Replies: 7
Views: 6573
|
Forum: Technical Knowledge Base Posted: Sat Oct 06, 2018 5:46 pm Subject: Help needed with wiper blade install |
Hi Ron,
Thanks for the pic. I installed them as you did.......they sure feel flimsy this way, but I guess they work. I then installed the arms on the wiper motors with the acorn nut, and then ex ... |
| Topic: Help needed with wiper blade install |
w30bob
Replies: 7
Views: 6573
|
Forum: Technical Knowledge Base Posted: Thu Oct 04, 2018 7:17 pm Subject: Help needed with wiper blade install |
Hi Guys,
Ok, no laughing. I mean it. Really. I feel stupid enough as it is. I finally got around to replacing the electric wiper motors that came on my A1 with the correct vacuum motors, arms, ... |
| Topic: Radio Power Feed Installation Instructions Download? |
w30bob
Replies: 5
Views: 6438
|
Forum: Technical Knowledge Base Posted: Sat May 12, 2018 7:30 pm Subject: Radio Power Feed Installation Instructions Download? |
Hi Rad,
Well.........sort of. There's a larger center alignment pin and 4 equa-distant smaller pins all 90 degrees apart........so I call that a 5-Pin. Technically I think you're right......so m ... |
| Topic: Radio Power Feed Installation Instructions Download? |
w30bob
Replies: 5
Views: 6438
|
Forum: Technical Knowledge Base Posted: Sat May 12, 2018 1:12 pm Subject: Radio Power Feed Installation Instructions Download? |
Hi Sky,
No, I haven't.........I keep forgetting about those guys!!
thanks,
bob |
| Topic: Radio Power Feed Installation Instructions Download? |
w30bob
Replies: 5
Views: 6438
|
Forum: Technical Knowledge Base Posted: Sat May 12, 2018 11:13 am Subject: Radio Power Feed Installation Instructions Download? |
Hi Guys,
Picked up the whole radio thing (PRC-10/AM-598/Power Feed kit/MT-759, antenna mounts, speaker, handset, etc, etc, at Aberdeen, minus one cable....I'll get to that in a minute. First, the ... |
| Topic: Fuel Tank Sender Wire Replacements (2) |
w30bob
Replies: 8
Views: 11374
|
Forum: Auctions Posted: Tue Apr 10, 2018 2:42 pm Subject: Fuel Tank Sender Wire Replacements (2) |
| Yeah, mine were pristine in the package too. Checked them electrically......no issues. Sure wish my A1 used Packard connectors.......I seem to fall over them everywhere and they're cheap. Components ... |
| Topic: Loom for fuel sender wire |
w30bob
Replies: 15
Views: 12257
|
Forum: Technical Knowledge Base Posted: Tue Apr 10, 2018 6:50 am Subject: Loom for fuel sender wire |
| Unfortunately the old guy behind the counter at our local NAPA has retired/quit/died/moved to Tahiti/etc, and the young guns now have no clue how to find anything I need anymore. I would think I'd ha ... |
| Topic: Fuel Tank Sender Wire Replacements (2) |
w30bob
Replies: 8
Views: 11374
|
Forum: Auctions Posted: Fri Apr 06, 2018 2:06 pm Subject: Fuel Tank Sender Wire Replacements (2) |
Yeah, mine arrived today............will check them when I get a minute.
bob |
| Topic: WTB: M38A1 Voltage Regulator Splash Guard |
w30bob
Replies: 2
Views: 4982
|
Forum: Wanted Posted: Fri Apr 06, 2018 7:28 am Subject: WTB: M38A1 Voltage Regulator Splash Guard |
Looks like there are some NOS ones on ePay as well.
https://www.ebay.com/itm/Jeep-Willys-M38A1-Voltage-Regulator-Splash-Shield-G-758/173254201854?epid=1655695099&hash=item2856c151fe:g:j9sAAOSwB ... |
| Topic: Cracked blocks |
w30bob
Replies: 11
Views: 9892
|
Forum: Technical Knowledge Base Posted: Thu Apr 05, 2018 9:28 pm Subject: Cracked blocks |
Xamon,
Welding cast iron engine blocks isn't impossible, but is difficult to do correctly. The issue is how cast iron behaves when heated and cooled. There is tons of info on the subject online ... |
| Topic: Loom for fuel sender wire |
w30bob
Replies: 15
Views: 12257
|
Forum: Technical Knowledge Base Posted: Thu Apr 05, 2018 10:12 am Subject: Loom for fuel sender wire |
Hi Guys,
I realize you're talking M38 here, but in case anyone is interested in the Loom length for the tank sender in the M38A1.......the ORD says the Loom is 74" and the wire is 99" long. For t ... |
| Topic: WTB - M38A1 Fuel Shut-Off Valve |
w30bob
Replies: 18
Views: 23724
|
Forum: Wanted Posted: Wed Apr 04, 2018 12:38 pm Subject: WTB - M38A1 Fuel Shut-Off Valve |
Hi Ron,
I have to check. Since getting my jeep last year I've totally blown off the M37 guys.........but they should remember me. I'll see if any progress with Anderson has been made. I'll also ... |
| Topic: M38a1 door question |
w30bob
Replies: 10
Views: 9121
|
Forum: Technical Knowledge Base Posted: Mon Apr 02, 2018 10:42 am Subject: M38a1 door question |
Ah..........that makes sense. Thanks.
By the way........most of the doors I see for sale, either NOS or used, have foggy/yellowed windows. I get that vinyl gets like that........but does anyone k ... |
| |
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
