Search found 37 matches

I began rebuilding my engine yesterday and hit a snag as soon as the valves were in - 3 intake valve tappets and 1 exhaust valve tappet were rotating as I cycled the cam. Previously when I disassembl ...

I had not considered the CDN body route. I'll check what you suggest on the next visit. Thanks.

I had an interesting day on Saturday and wanted to get other perspectives. First, I have agreed to buy into a basket case M38 with another member here on the board as a parts jeep. He is interested ...

Is that mud packed into the oil filler tube? The ribbed head is 6 40161 which is a later CJ2a (and 3a?) head. You can't argue with free. Very Happy

I have started from a very similar place although it sounds like I had a bit more to begin with. I also have a limited jeep fund and need to save where possible while eventually getting the jeep on t ...

6+4+3+1+1 = 15, not 16 Embarassed

A quick image showing the Coopers, Goodyears, and 15" Mohawks (left to right)

http://www.willysmjeeps.com/v2/modules.php?set_albumName=1951-MC25486&id=IMG_1559 ...

I have 16 NDCC tires for sale. All are mounted on rims and hold air.

◦(3) Mohawk 7.00X15s mounted on late 50s CJ rims
◦(4) Cooper Cross Country 7.00X16s mounted on M151 rims
◦ ...

I recently purchased (17) 7.00 X 16 NDCCs (11 Goodyears, 4 Coopers, 1 Mohawk, and 1 Kelly Springfield) mounted on M151 rims. They have all seen some use but are in decent condititon. I have only fou ...

Thanks for the quick responses. I get the message and will save accordingly.

I have been toying with the idea of purchasing a blasting cabinet setup. Many of them show an air requirement around 9 cfm @ 90psi. That translates into a large and expensive compressor. I would on ...

I had a similar problem with stripped bolt holes on each steering knuckle. In my case, three holes were stripped where the locking hub bolts to the knuckle on the PS; one stripped hole on the DS. Di ...

The term "combat rims (wheels)" refers to the two piece wheels that came on MBs/GPWs which allowed for tire changes in the field without specialized tools. The wheel in your picture appears to be the ...

I caught a comment on the g503 site about "sacrificing the life of an L134 using a Cuno filter for cosmetic reasons" from Wes's adversary. It sounds like the military junior fram filter was used excl ...

An oil filter that came with a civilian L134 was leaking through the box on my parts shelf. I decided to take it apart and drain the last bit of oil out of it. I did a little research after disassem ...

Yes, all original M38 blocks are stamped MCxxxx. The J3xxxx stamped block is civilian (cj3a, I think). The front engine plate and later (10 bolt) bellhousings are interchangable and not a good indic ...


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.